Replacement Doors For Furrion Tankless Water Heaters For Larger Openings

Question

Question:

I bought one with a 16 inch door. But that’s the same size as my opening. Can I put a 18 by 18 door on it. Item # 2021132338

asked by: Jeff G

0

Expert Reply:

Yes, you can unscrew the old 16" x 16" door and swap it out with the Replacement Access Door for Furrion RV Tankless Water Heater - 18" x 18" # FR73FR. We also carry a 16" x 18" door # FR63FR if the 18" x 18" is too large.

I do highly recommend using some butyl tape # AL28FJ on the back of the door over the screw holes to form a watertight seal between it and the wall of your RV.

expert reply by: Kevin C

0

Answer 1

There are 3 doors that work with the Furrion tankless water heater. For a 16" x 16" door use #FR43FR For a 16" X 18" door use #FR63FR For a 18" X 18" door use #FR73FR I would choose the smallest door unless I was working…

view full answer...

Answer 2

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 3

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 4

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 5

Definitely a smart idea to replace your Atwood heater with a tankless unit, as they are much more energy-efficient and quicker to heat your water. We do have an option that will easily fit in place of your 16" x 15-1/2" x 20-7/8"…

view full answer...

Answer 6

For your Atwood GC10A-4E water heater, I recommend going with the Furrion RV Tankless Water Heater #FR68SR. This water heater has a 13,000 - 60,000 Btu heating capacity, has cut out dimensions of 12-3/4" to 12-13/16" wide, 12-5/8" to…

view full answer...

Answer 7

The most direct replacement would be the model GC10A-4E, this is not a heater currently available. However, the better, in my opinion, replacement water heater would be a tankless system. The Furrion RV Tankless Water Heater, #FR98SR, has dimensions…

view full answer...

Answer 8

You can replace the Atwood RV Water Heater AT94022 with the Furrion RV Tankless Water Heater #FR93FR, so long as you have the needed space. According to the instructions, which I have linked for you below, this Furrion unit simply requires the…

view full answer...

Answer 9

I recommend using the Furrion RV Tankless Water Heater part #FR68SR to replace an Atwood GC10A-4E Water Heater. I have verified that the cutout dimensions will not need to be enlarged and the door on the outside will cover everything. The only thing…

view full answer...

Replacement Doors For Furrion Tankless Water Heaters For Larger Openings

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching