Vehicle Wiring Harness & Trailer Hitch Receiver Confirmed to Fit 2023 Kia Sorento SX Prestige Hybrid
Question:
I have a 2023 Kia Sorento SX prestige plug-in hybrid I am told by parts at a local Kia dealer it should be a plug-in and play. which harness fits my vehcle?
asked by: Jim M
Expert Reply:
In the event your 2023 Kia Sorento SX Prestige plug-in hybrid has the factory tow package wiring you will need either the Tekonsha 4-Way # 118269 or 7-Way # TK24FR. You can determine if you have the factory connectors by checking in the rear drivers side fender area. You can watch one of installation videos for these which will show you how to access the area the connectors are in.
If you do not have the factory tow package connections you will then need the Curt 4-Way # C99DR harness that connects in line of the tail lights.
If you are needing a receiver I recommend the Curt Trailer Hitch Receiver # C34ER.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Brake Controllers are Compatible With Tekonsha 7-Way Harness TK24FR on 2020 Kia Sedona?
- Q&A: Can The Tekonsha Vehicle Wiring Harness Be Installed on 2020 Kia Sedona Without Brake Controller?
- Q&A: What is Max Safe Tire Temperature
- Q&A: Recommended Hitch and 7-Way Wiring Harness for a 2020 Kia Sorento w/out the Towing Package
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Does Tekonsha OEM 7-Way Wiring Harness Fit 2019 Kia Sedona Without Factory Tow Package
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: Roadmaster Vehicle Specific Base Plates