Replacement Hitch Mounting Hardware For a Curt 15810 Trailer Hitch

Question

Question:

I need the kit for Hardware kit for Curt 15810 hitch. It has bolts, nuts, and square hole spacer? Do you know where I can find this. If not as a kit, each item individually. I need 8 of each bolt, nut, spacer.

asked by: Zach D

0

Expert Reply:

We do have the replacement hardware needed for your Curt Trailer Hitch Receiver # C15810.

You will need to use the Replacement Hardware Kit for Trailer Hitches # RHK and input the 15810 in the box that says "Hitch Item Number".

expert reply by: Scott S

0

Answer 1

We have exactly what you need. For your 2005 Ford F-350 Super Duty, I recommend the Curt Class V Receiver Hitch #C15810. This Class V hitch is confirmed to fit your F-350 and will provide you with the 2-1/2 inch receiver opening that you are…

view full answer...

Answer 2

While I don't know exactly how far the Curt Hitch part #C15810 would hang below the bumper of your 2002 Ford Superduty I can tell you how you can figure it out. I went out into our warehouse and measured the distance from the mounting surface…

view full answer...

Answer 3

I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the #C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket #C58003 which will mount to the receiver tube of the Curt Trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Replacement Hitch Mounting Hardware For a Curt 15810 Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching