Recommended Industry Standard Rails for a 2023 GMC Sierra 2500
Question:
I am getting a 2023 GMC Sierra 2500 without the puck system from the factory. I need a set of rails that sit inside the bed to mount my 5th wheel hitch on. I would like a set that is easy to install.
asked by: David N
Expert Reply:
To add a set of industry standard rails to your 2023 GMC Sierra 2500 you will want the Curt Fifth Wheel Installation Kit item # C16429-204. This kit fits both the 6-3/4' and 8' bed lengths.
This kit is custom fit and bolts to your Sierra's frame with included hardware. It attaches in pre-drilled holes in your trucks frame. The brackets mount on the outside of your frame to allow for an easier installation.
These industry standard rails will allow you to attach a Curt 5th wheel hitch and any other 5th wheel hitch that fits on industry standard rails like B&W, Draw-Tite, or Reese.
I have linked a couple of pictures below that will show you what these rails look like installed along with an installation video.
To make towing with a 5th wheel easier I recommend adding the Demco 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug item # DM8555002. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient.
I have linked an installation video below along with a picture of this in bed 7-way in use.
Products Referenced in This Question
Demco 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug - 10' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 10 Feet Long
- Custom Fit
- 7 Round - Blade
- Demco
more information >
Product Page this Question was Asked From
Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fifth Wheel Hitch
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: What Exactly is Tongue Weight?
- Article: How to Charge RV Batteries
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose the Right Trailer Hitch Class