Metal Valve Stems for TPMS on Lance 2375 Travel Trailer
Question:
I have a Lance 2375 travel trailer with aluminum wheels. It has Dexter 5,000 lb. torsion axles. I want to install my TPMS sensors on the valve stems but it has rubber valve stems and I want to replace them with metal valve stems. The counter bore diameter for the valve stem is .687 inch. I need short ones so the TPMS does not extend past the tire sidewall. Tire pressure max is 85 PSI. Please advise part number.
asked by: Bradley T
Expert Reply:
The only metal valve stems we have available are the Americana Metal, Bolt-In Valve Stem # AM20906. These fit the standard .453" and .625" holes on trailer wheels. More than likely you have a .625" hole in your wheels, I recommend double checking the measurement to be sure.
These measure 1-1/4" long which is also fairly standard, and can handle up to 200 psi. Without knowing what wheels or sensors you have it is hard to say how far out the TPMS will extend, but more than likely it will stick out further than you want no matter what valve stems you install.
Product Page this Question was Asked From
Americana Metal, Bolt-In Valve Stem - 1-1/4" Long
- Tire Repair Tools
- Valve Stems
- Bolt-In Stem
- 10 Inch Tire
- 12 Inch Tire
- 13 Inch Tire
- 14 Inch Tire
- 15 Inch Tire
- 16 Inch Tire
- 17.5 Inch
- Chrome
- 200 psi
- Silver
- Americana
more information >
Continue Researching
- Shop: Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel - 5 on 4-1/2 - Load Range C
- Shop: Westlake ST225/75R15 Radial Tire w/ 15" Liger Aluminum Wheel - 6 on 5-1/2 - Glossy Black
- Search Results: trailer tires and wheels
- Search Results: valve stems
- Search Results: metal valve stems
- Shop: Replacement Center Cap for Namsco Wheel Covers - Qty 1
- Shop: Wheel Liners
- Shop: Titan Chain Snow Tire Chains with Cams - Ladder Pattern - Twist Links - 1 Pair
- Q&A: What Does S-Class Mean in Reference to Vehicle Tire Chains
- Shop: Tire Chains
- Article: Glacier Chains
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: 44649
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Shop: Grease Seals 10-36 (pair)
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Seal With Dimensions to Replace 171255UC
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels