Four-Wire Option w/ Backup Light For Thinline LED Trailer Tail Light

Question

Question:

I need this exact light, same size but need it to have 4 wires to match what i have. Please send link?

asked by: Nelson Z

0

Expert Reply:

We do indeed have a four-wire version of the Thinline LED Trailer Tail Light # STL64RB. All four-wire trailer lights are for stop, turn, tail, and backup lights, so that portion of the light is obviously going to have a clear lens (as do all four-wire lights due to having the backup function). The correct four-wire light is the following:

- Fusion LED Combination Tail Light # STL264RB

The # STL264RB has the exact same measurements as the # STL64RB, at 20-1/2" long x 1" tall x 3/4" deep, and if you'd like a bezel to mount you can use the Mounting Bezel - Chrome # A64CRB or Black # A64BB.

The only other thing you'll need are butt connectors for your wires, the Heat Shrink Butt Connectors # DW05745-5.

expert reply by: Kyle S

0

Answer 1

I checked your owners manual and the weight capacity of 100 lbs without moonroof or 45 lbs with moon roof are for the factory crossbars. Granted, aftermarket crossbars won't greatly increase the capacity, so carrying two kayaks on a moon roof…

view full answer...

Answer 2

The Malone MicroSport Trailer part #MPG460G comes with all of the necessary related documents that will be needed to register the trailer. Once you obtain these documents you will want to take them with you to your local department of motor vehicles…

view full answer...

Answer 3

For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…

view full answer...

Answer 6

I do have an option for you but we have not yet gotten out hands on a 2019 Chevrolet Blazer therefore, have not had the chance to look for the brake controller wiring port either. I checked with both Tekonsha and Curt and it looks like they have not…

view full answer...

Answer 7

The factory trailer brake controller port on your 2021 Chevrolet Tahoe is located underneath the dash just to the left of the steering wheel. It will be taped to another harness so it may take a bit of looking to find. Keep in mind that if your Tahoe…

view full answer...

Answer 8

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 9

Yes you are correct in your assumption. On the Optronics Thinline LED #STL64RB, the Red wire is for turn signal, so this will go either the green or yellow wire on your trailer. The black wire is tail lights so this would go to the brown wire on your…

view full answer...

Answer 10

I took a quick stroll to the warehouse to double check the color of the Hot Line LED Trailer Tail Light #328-003-6017X and it is red. While I cannot speak for part numbers specifically from Command Electronics I can tell you with certainty that…

view full answer...

Four-Wire Option w/ Backup Light For Thinline LED Trailer Tail Light

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching