How To Check a Trailer Axle To Determine Bearing Sizes For a 5 on 4-3/4" Idler Hub
Question:
I have a 5x8 trailer with a 5 lug axle with 4 3/4 bolt pattern - how can I confirm that the axle is 3500 lb and confirm the correct pre lub part number
asked by: Steve K
Expert Reply:
The best way to verify the exact weight capacity for an axle is by checking the serial number on the axle. This is found an the axle tag or possibly stamped onto the axle tube. You can also remove one of your hubs to measure the spindle with a Digital Caliper # PTW80157. These measurements will help you to determine the axle capacity, I have included an image below which shows what to measure on the spindle. Here is a the measurements for the bearings and grease seal on the Easy Grease Trailer Idler Hub Assembly # AKIHUB-5475-35-EZ-K.
Inner Bearing # L68149 (1.378" ID)
Outer Bearing # L44649 (1.063" ID)
Grease Seal # 58846 (1.719" ID)
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Bolt Pattern Referred To In Hub and Wheel Fit
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-5475-35-K
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: axel kit
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Tire Sizing
- Shop: Fifth Wheel Hitch
- Search Results: 68149
- Video: Titan Trailer Brakes T2385200 Review
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Search Results: dust cap
- Article: How to Choose the Right Trailer Hitch Class