How To Trim Ceiling Garnish For MaxxAir MaxxFan # MA54FR

Question

Question:

I have a roof thickness that is less than the measurement of the garnish. What toll should I use to trim it down to fit my unit? I do not want to crack it as I make the cuts.

asked by: Pat S

0

Expert Reply:

When it comes to trimming The Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent # MA54FR you will need to use masking tape to mark where you want to make your cut on the garnish. You will then need to use a hand saw to cut along the masking tape.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…

view full answer...

Answer 2

It sounds like you're looking for a replacement ceiling garnish for your MaxxAir MaxxFan RV roof vent. If that's what you're after, we have the Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent #MA54FR. This garnish will fit the…

view full answer...

Answer 3

Since you have a MaxxFan on your Winnebago Travato the garnish part #MA54FR that you referenced would fit and work well.

view full answer...

Answer 4

The ceiling garnishes like the MaxxAir Maxxfan RV Roof Vent - White item #MA54FR you were looking at are universal. So long as you have the standard 14"x14" opening for your MaxxAir 4501k this garnish will be able to fit. It may require…

view full answer...

Answer 5

The Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent - Black #MA10-20209 is designed to fit in 14" x 14" rough vent cutout dimensions and the plastic garnish itself is roughly 1/4" thick. The outer diameter of the flange body will be…

view full answer...

Answer 6

It sounds like you're looking for the Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent #MA54FR, and will fit a standard vent opening of 14" x 14".

view full answer...

Answer 7

To trim down the ceiling garnish of the MaxxAir Mini Trailer Roof Vent #MA00-03750 the easiest solution would be to measure how much you plan to cut off, mark where the cut needs to be made with a marker or pencil, and then use a hand saw to make the…

view full answer...

Answer 8

There's no reason you couldn't use the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851 as a bathroom fan. It's an exhaust fan that would do an excellent job in this application. If you'd rather use the larger in size…

view full answer...

Answer 9

Due to the design of the lid on the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K you really won't get much light passing through if any on your trailer. If you're looking for an option that comes with a light then we also…

view full answer...

Answer 10

Since there isn't a way to upgrade your current roof vent to a version with a powered lift you'd have to go with an all new MaxxFan roof vent that has that feature like with the part #MA00-07500K instead.

view full answer...

Answer 11

The light switch in your bathroom should be connected to 12V power but I'm not sure that's where I'd connect the power for the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851. Reason being that if you wanted to leave the fan…

view full answer...

Answer 12

I went ahead and checked out the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K, and it turns out that you can use this in a bathroom application, however you are going to want to make sure that you aren't putting this above any tubs, showers…

view full answer...

How To Trim Ceiling Garnish For MaxxAir MaxxFan # MA54FR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching