Will The Trailer Idler Axle Beam Work With Dexter 8-01A Hubs?
Question:
Will Item # e48GR axle fit my existing hubs which are Dexter 8-01A, 4 on 4?
asked by: Tim
0
Expert Reply:
I wasn't able to find any information on your Dexter hubs, however the Trailer Idler Axle Beam with Easy Grease Spindles # e48GR that you mention will work with a Replacement Trailer Hub Bearing # L44649 and the Grease Seal # 58846.
So, as long as your Dexter 8-01A hubs have the same measurements, this should fit with no issues.
expert reply by:
Bryce D
0
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Shop: Washer For 1" Spindle
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Wiring
- Search Results: 68149
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 25580
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Brake Controller
- Shop: Grease Seals 10-36 (pair)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Seal With Dimensions to Replace 171255UC
- Search Results: dust cap
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Gooseneck Hitch
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: equalizer
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Shop: Suspension Enhancement