Brake Controller Adapter Harness For 2022 Ram 1500 For Curt Discovery Brake Controller

Question

Question:

Curt Discovery Brake Controller. Do you have a connection cable for a 2022 Dodge Ram 1500?

asked by: Nick

0

Expert Reply:

There is; I checked with Curt and verified for you the correct brake controller adapter harness for your 2022 Ram 1500 and the Curt Discovery Trailer Brake Controller # C84VV is the following:

- Curt Custom Wiring Adapter for Trailer Brake Controllers # C51458

expert reply by: Kyle S

0

Answer 1

Yes, the Curt Spectrum #C51170 will fit and work great installed in your 2019 Ram 1500. There's not reason it wouldn't be compatible. The install harness needed would be the part #C51458 but it sounds like you have that already.

view full answer...

Answer 2

The Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In #C51458 is absolutely compatible with your 2020 Ram 1500 with the factory 7-way.

view full answer...

Answer 3

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 4

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Brake Controller Adapter Harness For 2022 Ram 1500 For Curt Discovery Brake Controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching