15 Wheels Availability With a 5 on 5-1/2 Bolt Pattern And Largest Compatible Tire

Question

Question:

I am looking for a 15X6 rim with a 5.5X5 bolt pattern for an old stock trailer. I can seem to find one on your site. Can you help me out? Thanks

asked by: Nancy O

0

Expert Reply:

The Vesper Steel Modular Trailer Wheel # TA37RR is the only 15" wheel we carry that have the 5 on 5-1/2" bolt pattern. This wheel is both 5-1/2" wide and the Westlake ST225/75R15 Radial Trailer Tire # LHWL304 is the largest tire that will fit this wheel width.

expert reply by: Bud M

0

Answer 1

It sure will! A 225/75-15 tire will fit on a wheel that's 5, 6, 6-1/2, or 7 inches wide. I've linked to the 225/75-15 load range C, D and E tires we offer.

view full answer...

Answer 2

The Dexstar Conventional Steel Wheel with Offset is only available with a 5 on 4-1/2 bolt pattern. The only 15" wheels with a 5 on 5-1/2 are the following: -Vesper Steel Modular Trailer Wheel #TA37RR -Provider ST205/75R15 Radial Trailer Tire w/…

view full answer...

Answer 3

For your trailer I recommend the Karrier ST205/75R15 Radial Trailer Tire - Load Range C #AM10244 to be mounted on the Vesper Steel Modular Trailer Wheel w/ Offset - 15" x 5" Rim - 5 on 5-1/2 - Silver #TA37RR. You can have these mounted at a…

view full answer...

Answer 4

The Vesper Steel Modular Trailer Wheel w/ Offset - 15" x 5" Rim - 5 on 5-1/2 - Silver #TA37RR has a 4.25 inch pilot opening. The only time the size of the pilot opening is really important is if you're using a hub-centric wheel (which…

view full answer...

Answer 5

We have a Taskmaster Silver Vesper wheel #TA37RR that has your 5 on 5-1/2 bolt pattern and A Kenda Karrier tire with a tire size ST205/75R15 #AM10244. These would need to be mounted at a local shop.

view full answer...

Answer 6

To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit #TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit #AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting…

view full answer...

Answer 7

The replacement brake shoes or pads are available. For the brake assembly you referenced, use part #BP04-095. These brake shoes fit Dexter, Fayette, and Foreman brake assemblies. If your assembly was manufactured by Hayes, use part #BP04-100. Each…

view full answer...

Answer 8

If your brake assembly was manufactured by Dexter, Fayette, or Foreman, the #BP04-095 brake shoes you referenced are indeed the correct replacement. They are the same shape and design as the original brake shoes. You can see a product description…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

15 Wheels Availability With a 5 on 5-1/2 Bolt Pattern And Largest Compatible Tire

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching