Replacement Vent Lid for 13" x 13" Vent Opening with Continuous Hinge

Question

Question:

Hi, Trying to determine the size of vent lid replacement I need for my 2017 forest River Wildwood xlite trailer - the vent opening is 13 x 13 and has a continuous hinge. Thanks

asked by: Markus I

0

Expert Reply:

Sounds like the vent cover you need is the replacement for Ventline Old-Style Rounded Dome Trailer Roof Vents which comes in Smoke # BV0554-03 as well as White # BV0554-01. These have the continuous hinge and fit the standard 14" x 14" vents.

Sometimes the measurements are a little weird depending on where you measure but I've never heard of a 13" x 13" vent opening before which is why I recommend the ones above for the 14" configuration.

Attached is an installation video of this vent cover for you to check out.

expert reply by: Jon G

0

Answer 1

You do not have to buy a new RV, from your photo it looks like you need Replacement cover part #CAM40153. Although the vent itself may be considered 14 x 14 some roof vents came with smaller covers. In order to determine the correct roof vent,…

view full answer...

Answer 2

Thanks for the dimensions. I recommend replacing your current unit with the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V #JWM60A. The dimensions you gave don't directly fit any of our units, but the #JWM60A you asked from is…

view full answer...

Answer 3

Yes, the correct wedge for your Lippert Turning Point pin box and B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package #BWRVK3710 is the Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD.

view full answer...

Answer 4

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Replacement Vent Lid for 13" x 13" Vent Opening with Continuous Hinge

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching