Correct Replacement for Kelsey Hayes 602027 and 602028 Electric Trailer Brakes 2,750LB Axel
Question:
Looking to swap all 4 electric brakes on our 1980s Sunline Travel Trailer. Sticker on them reads Kelsey Hayes 602027 and 602028. A previous thread asked the same question with the response below: The correct replacement braking assemblies for the Kelsey Hayes 602027 and 602028 is the Electric Trailer Brake Kit part # AKEBRK-35. These will be direct bolt-on replacement. I would add the Mounting Hardware for 10inch Brake Assemblies part # BRKH10B as well for a complete swap My question is around my axels - they are labeled as 2,750LB - and the product above is rated for 3,500lb - would these still work for me?
asked by: Brandon
Expert Reply:
The Electric Trailer Brake Kit - 10 inch - Left and Right Hand Assemblies - 3,500 pounds # AKEBRK-35 is the correct brake set up for your Kelsey Hayes 602027 and 602028 and even though your trailer is rated for 2,750 pounds the 3,500 pound brakes will work.
The driver's-side and passenger's-side electric brakes measure to be 10 inches by 2-1/4 inches. The brake pads are made of a durable friction material which provide an improved braking and longevity.
The brakes have an e-coated backing plate that resist rust. They fit up to 14 inch to 15 inch wheels.
The Nuts and Lock Washers # BRKH10B are sold separately.
I attached an installation video link below.
Products Referenced in This Question
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Correct Replacement for Kelsey Hayes 602027 and 602028 Electric Trailer Brakes
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Replacement Brake Assemblies for Trailer with Kelsey Hayes Brake Set
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Drum Assemblies for AL-KO 8490 Hubs
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Video: etrailer Electric Trailer Brake Kit Review and Installation
- Search Results: 3500 lb drop axle
- Search Results: trailer drum brake kit
- Search Results: fenders
- Shop: Sleeve-Lock A-Frame Trailer Coupler - Flip Latch - Black - 2" Ball - 7,000 lbs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Does Electric Trailer Brake Kit # AKEBRK-35-SA Come with Drums
- Q&A: Does the Dexter Nev-R-Adjust Electric Trailer Brake Kit for 3.5K Axles Come with Hubs
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Search Results: al~ko 8490
- Search Results: al~ko
- Shop: Vehicle Tow Bar Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)