Replacement Rear Turnbuckle That Works With The TorkLift AnchorGuard Turnbuckles

Question

Question:

Hello. I am looking for a replacement set of O rings for the Torklift TLS9020 turnbuckles. Do you sell parts for Torklift? Thanks kindly.

asked by: Scott J

1

Helpful Expert Reply:

The o-rings part of the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020 are not available individually, unfortunately.

I recommend taking one of the o-rings needed for your turnbuckles to your local hardware store and find a match there.

Or,

You could replace the entire turnbuckle with something like the:

-Replacement Rear Turnbuckle for HappiJac Qwik-Load Turnbuckle Set # LC182896, which will include the o-ring you need, and replace a turnbuckle. This turnbuckle has a similar adjustment range of 22-1/2"- 35-1/2", and will work fine with your TorkLift turnbuckles.

expert reply by: Bryce D

1

Answer 1

Did you try the longer rear hooks in the front position of the #LC182895? If those were long enough they are available separately with #LC182896.

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 4

Hey Mark, thanks for the question, and while we have exactly what you're looking for, it's actually a different part number (the one you mentioned is for a long bed). I went ahead and verified for you the correct SuperHitch for your 2018…

view full answer...

Answer 5

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 6

The HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 have a minimum reach of 16-1/2". This means your tie-downs need to be at least 16-1/2" away from the attachment points on your camper. The best way to determine fitment would…

view full answer...

Answer 7

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Answer 8

Thanks for reaching out, Jake! The front TorkLift Tie-Downs #TL34YR for your 2023 Ford Ranger uses 1/2" bolts that need to be torqued to 75 ft-lbs according to my contact at TorkLift.

view full answer...

Answer 9

I reached out to TorkLift and they told me that while the FastGun turnbuckles do not have a specific weight capacity in regards to the camper, they are designed to hold down a camper at the anchor point with 300 lbs of pull-down force per turnbuckle…

view full answer...

Replacement Rear Turnbuckle That Works With The TorkLift AnchorGuard Turnbuckles

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching