Weight Of 5TH Wheel Rail Adapters For a 2022 Chevrolet Silverado 3500 With Factory Puck/Prep Hitch

Question

Question:

Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package - 21K Item # DM6333 Can U tell me how much this item weighs? Didnt see this info on your website..thanks

asked by: Rick S

0

Expert Reply:

The Demco 5th Wheel Rail Adapter # DM6333 for your 2022 Chevrolet Silverado 3500 weighs 105lbs.

If you are concerned that this might be to heavy the Curt Rail Adapter # C88KR is lighter at only 77lbs.

expert reply by: Bud M

0

Answer 1

That's a good question because there is only one difference between the TruXedo Sentry and TruXedo Sentry CT covers for your 2020 Chevy Silverado 2500, which is the material that the cover is made from. The Sentry cover is made of an…

view full answer...

Answer 2

I checked with Curt and the footprint dimensions of the base of the Curt CrossWing Lightweight 5th Wheel Hitch part #C92DR are 25.8 inches front to back and then 42 inches from left to right.

view full answer...

Answer 3

In order to install a fifth wheel hitch that's compatible with industry-standard bed mounting rails like your Reese 16K hitch, you'll want to use the Demco #DM6333 that you'd looked at. The adapter drops into the in-bed pucks and latch…

view full answer...

Answer 4

The Ford OEM puck system is different than the Chevrolet/GMC OEM puck system therefore, you can't use a 5th wheel hitch from one in the other. The Ford OEM system has pucks which are much closer together than on the Chevrolet/GMC OEM system. The…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 9

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 10

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Weight Of 5TH Wheel Rail Adapters For a 2022 Chevrolet Silverado 3500 With Factory Puck/Prep Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching