Replacement Bearings, Seal, and Cotter Pin for 2000 Trailstar 8 Pop Up Camper
Question:
I have a 2000 Trailstar 8 popup camper. Id like to replace the bearings, seals, and cotter pins. The number on the bearing is L44649. Im having difficulty finding the correct bearing kit that matches my trailer.
asked by: Michael S
Expert Reply:
The correct bearing kit for your 2000 Trailstar 8 camper will depend on your other bearing and grease seal. If the # L44649 is your inner and outer bearing then you need the Bearing Kit, L44649 Inner/Outer Bearings, 10-60 Seal # BK1-150. I recommend measuring the inner diameter of your grease seal or spindle where the seal sits just to be sure. This kit uses a # 10-9 seal with an inner diameter of 1.50".
If only your outer bearing is the # L44649 then it is likely your inner bearing is # L68149 which is standard for a 3,500 lb axle. This would mean the correct bearing kit is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100. This kit uses a # 58846 seal with an inner diameter of 1.719".
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Article: Most Popular Wheel Bearings
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Is LaSalle Bristol XTRM Universal Self-Leveling Sealant Comparable to Dicor Lap Sealant
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Article: How to Rent an RV
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Article: How to Charge RV Batteries
- Q&A: What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250
- Article: How to Measure a Trailer Axle
- Q&A: Replacement 12 inch Brake Assemblies for Dexter 36-89 on Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer