Replacement Idler Hubs for a EZ loader Oil Bath Hub Assembly

Question:

Is there anything comparable to EZ loader oil bath hub assembly 300-029534. Also I would need something comparable to EZ loader torsion axle 300-031349-10. Any info would help thank you

asked by: Mark N

Expert Reply:

I would be happy to help you! The EZ loader oil bath hub assembly 300-029534 is a complete 5-on-4-1/2 idler hub kit that includes races, bearings, seal, washers, nut, retainer nut and cotter pin, bearing protector and lug nuts. Some of these hubs fit on a straight spindle, meaning as spindle that uses the same part for both its inner and outer bearing. The actual bearing numbers are not provided on their site. Our best option would be the Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast item # T4084600042.

The Titan 10" Hub and Rotor item # K08-435-05 that you were looking at can be also used with EZ lube spindles. It uses Inner bearing item # L68149 and Outer bearing item # L44649. The best way to determine which one you will need is to remove your hubs and measure the spindle and/or look at the numbers stamped into the side of the bearings. I have linked a diagram below that will show you how to measure your spindle.

You will also need the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 item # RG04-040 which has the removable center sections to make it compatible with your EZ lube spindle.

As far as your torsion axle goes we do not have anything comparable. The best option we have is to replace it with the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs item # TASR5200S03.