Replacement Regal Style idler Head Cover In Black For A 2022 Flagstaff Classic 8529CSB

Question

Question:

Hi Im looking for a Solera power awning idler cover for the front I see you have the right side covers in black and only see the left covers in white my cover is the regal style its on a 2022 flagstaff classic 8529csb

asked by: Timothy C

0

Expert Reply:

For your 2022 Flagstaff Classic 8529CSB, you can use the:

-Replacement Cover for Solera Awnings # LC643923 for a replacement regal style idler head (left side) cover.

expert reply by: Bryce D

0

Answer 1

Yes, you can use the 4-Leaf Spring part #e22YR on your trailer. The overall length matches what you need and the capacity is close enough to your axle capacity that it would work well in that regard as well. It would have 500 more lbs than what your…

view full answer...

Answer 2

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

view full answer...

Answer 3

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

view full answer...

Answer 4

For the Replacement Cover for Solera Awnings #LC643923 for the idler head, and the Replacement Cover for Solera Awnings #LC643922 for the drive head, you can use the: -Replacement Solera Manual Awning Head Cover Fastener #LC266156, which are #6 x…

view full answer...

Answer 5

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

view full answer...

Answer 6

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

view full answer...

Answer 7

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Replacement Regal Style idler Head Cover In Black For A 2022 Flagstaff Classic 8529CSB

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching