Replacement Bearing Kit, Hubs and Brake Assemblies For a 2013 Dutchmen Kodiak 221RBSL Travel Trailer
Question:
I have a 2013 Dutchman / Kodiak 221RBSL. I need to replace all the wheel bearings, but do not see the 221RBSL listed. Do you have the specific bearings for my trailer? Also, what brand are your bearings? Thanks.
asked by: John H
Expert Reply:
The Hub Bearing Kit # BK2-100 is what you need for your 2013 Dutchmen Kodiak 221RBSL travel trailer. This kit is for one hub so you will need 4 kits if you are replacing them on both axles.
We also have the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K that comes complete with pre-greased bearings and grease seal installed. This will be needed if your drums are damaged or worn past their service life. Like the bearings these are per hub so you will need 4 if you want to give the trailer all new hubs.
The Self-Adjusting Electric Trailer Brake Kit # AKEBRK-35-SA includes brakes for one axle. The assemblies are directional so you will need to match them up correctly and these should be replaced as a set on the axle.
The bearings we have in our bearing kits are manufactured by TRP International.
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Search Results: slide out seals
- Shop: Replacement Screw In Heating Element with Gasket for Dometic Gas and Electric RV Water Heater
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Charge a Dump Trailer Battery
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: How Long Can You Boondock in an RV?
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Article: How to Use a Roof Rack (Like a Boss)
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: Recommended Square Bulldog Jack with 5,000 lb Capacity