Weight of Each Scissor Stabilizer Jack TJSCHD-24-4

Question

Question:

Whats the weight for each stabilizer?

asked by: Ethan

0

Expert Reply:

The individual weight is 10 lbs for one of the stabilizers in the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4.

expert reply by: Kyle S

0

Answer 1

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.…

view full answer...

Answer 2

We have some stabilizer jacks, but don't have a way of knowing what type of mounting or bracket is used on a 1994 Coleman pop-up camper. For jacks with a simple mounting hole dimension of 3 inches apart on center you can use the Stabilizer Jacks…

view full answer...

Answer 3

The Scissor Stabilizer Jack #TJSC-24, which also comes in a 2-pack #TJSCHD-24 and a 4-pack #TJSCHD-24-4, is a universal fit so you would need to double check our measurements to ensure they fit your travel trailer. When they are collapsed they…

view full answer...

Answer 4

The etrailer.com #TJSCHD-24 Scissor Stabilizer Jacks are a universal-fit item, so it should fit just about anything. The jacks would bolt to the underside of the frame members of your motorhome. When closed, the jack is 26 inches long, so if you can…

view full answer...

Answer 5

The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better illustrate how they are different. Bumper #21007-92230 will fit your 1971 Ford F-100 though you may find that the styling of bumper…

view full answer...

Answer 6

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

For toy haulers and RVs like your 2012 Keystone Raptor 365LEV there is only one 8 lug bolt pattern and that is the 8 on 6-1/2 inch like the #AM20766 that you referenced.

view full answer...

Answer 9

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The Kenda Karrier ST205/75R14 Radial Trailer Tire #AM10235 (Load Range D) and the Kenda Karrier ST215/75R14 #AM10229 (Load Range C) that you referenced are simply different tire sizes. The ST215/75R14 tire size is larger in diameter/height by just…

view full answer...

Answer 12

For your 14 inch wheels, I recommend the Provider ST215/75R14 Radial Trailer Tire - Load Range D #TTWTRTM2157514D. This is a slightly smaller tire, but it is very well made. It is rated for 2,200 lbs at 65 psi and has a max speed rating of 81 mph. It…

view full answer...

Weight of Each Scissor Stabilizer Jack TJSCHD-24-4

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching