How to Pick Out Replacement Dust Cap for Trailer Hub
Question:
I'm actually looking for the cover that goes over that part and the lugnuts. See attached photo.
asked by: David
Expert Reply:
We definitely can help but we need to know the diameter of the cap so that we can pick out the correct one. You'll need to remove the one you have and measure the outside diameter of the cap where it fits into the hub and we'll be able to pick you out what you need.
If you have a 1.99 inch diameter you'd want the part # RG04-040, if you have a 2.45 inch diameter you'd need part # DC250L-DCRP, or if you have 2.72 inch you'd want part # RG04-120.
To measure your hub bore you'd need the part # PTW80157.
Products Referenced in This Question
2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 2.441 Inch O.D.
- TruRyde
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 6 on 5-1/2 - ABS Plastic - Chrome - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Tires and Wheels
- Wheel Trim
- Hub Cover
- 6 Lugs
- Chrome
- Phoenix USA
more information >
Grease Cap, 2.72" OD Drive In with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 2.717 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Search Results: wheel bearing dust cap
- Search Results: wheel bearing cap
- Shop: CE Smith Bearing Protectors w/ Covers for 1.985" Hub Bore - Chrome - 1 Pair
- Search Results: bearing buddies
- Search Results: bearing buddy 1.980
- Q&A: Replacement Bearings for a 1982 Shoreline Trailer
- Q&A: Can Bearing Buddies be Used on a Travel Trailer
- Shop: Ark Articulating Off-Road Coupler for 2" Receivers - Trailer Side - 2" Ball
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: How to Pick Out Replacement Grease Caps for EZ Lube Spindle Grease Cap
- Q&A: Grease Cap RG04-040 Comes in a Pair
- Q&A: Dust Caps with Rubber Plugs for 1.99" Hub and 2.72" Hub
- Q&A: Does The Bearing Buddy Protect the Bearing from Water
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Search Results: dexter ez lube 85 1
- Search Results: ez lube dust cap
- Search Results: ez lube 3500 axle
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
David
6/6/2022
I'm actually looking for the cover that goes over that part and the lugnuts. See attached photo.