Does The Bearing Buddy Protect the Bearing from Water
Question:
does the plastic cap stop water from going into the bearing area? and is there a plastic cover bearing buddy calls it a bra for added protection? i would like to use both the plug and the cover.
asked by: Troy M
Expert Reply:
When the hubs get hot, and then backed into water for unloading, they have a tendency to suck water into the hub. Normal dust caps will not offer much protection. If you are looking for a bearing cap replacement that keeps out water and dirt, then the Bearing Buddy would be what you need to consider. The Bearing Buddy, like part # BB1980A-SS that fits a 1.980 hub bore, also includes the rubber protectors.
You would have to either have the outer bearing number, or take an exact measurement of the hub bore, by using either a dial or digital caliper. This will help determine which Bearing Buddy is the best fit for you. I have linked you to a video demonstrating the installation of the Bearing Buddy.
Please note that you will need a double lip seal to prevent the grease from blowing out when you are adding grease.
![Jeffrey L](https://images.etrailer.com/static/images/catg/people/560_tn.jpg)
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: BoatBuckle Kwik-Lok Transom Tie-Down Straps Review
- Video: BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps Review imf17632
- Video: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17632 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Q&A: Comparing Different Hydraulic Trailer Brakes for Boat Trailer
- Q&A: Replacement Hydraulic Trailer Brakes, Hubs, and Bearings For a Trailrite Boat Trailer
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Brake Actuator and Brakes for 4,000 Pound Tandem Axle Boat Trailer
- Q&A: How to Determine Which Drum Brakes to Get
- Q&A: Will the Hydraulic Brake Kit for 3,500 Lb Axles Work with 13 Wheels
- Q&A: Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
- Search Results: fuel
- Search Results: swing out hitch
- Search Results: swing out arm
- Search Results: 171255uc
- Search Results: folding trailer tongue
- Search Results: e68gr
- Search Results: led marker lights
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision