Replacement Bearings for 1998 Nash Travel Trailer
Question:
Hi, Im looking for wheel bearing kits for a 1998 Nash 28ft trailer with tandem axel and electric brakes. Not sure what part number to order? Thank you
asked by: Dan
Helpful Expert Reply:
It sounds like you have a 1998 Nash 26J. Based on what I have found this has a GVWR of 7,000 lbs which tells me you have 3,500 lb axles. Assuming that is the case, you will more than likely need Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100. This kit has the standard bearings and grease seal for a 3,500 lb axle.
The only way to truly be sure is to check your current bearings and grease seal. You can pull the hubs and either look for the part numbers stamped in the side of the bearings or measure your spindle where the bearings ride. If you are measuring I recommend using a digital caliper like the # PTW80157.
I have attached a helpful video along with a link to all of our bearings and seals for your reference.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Top Gifts for Dads in 2024
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Charge a Dump Trailer Battery
- Article: Trailer Tire Sizing
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Should the Tires Lift Off the Ground While Leveling With the Lippert Ground Control Leveling System
- Q&A: Replacement Inner Member Assembly for UFP A 60 Surge Brake Coupler
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation