Will The CIPA Custom Towing Mirrors, Part CM10900 Fit My 2013 GMC Yukon Denali

Question

Question:

Will these fit a 2013 Yukon Denali?

asked by: Bob S

1

Helpful Expert Reply:

Yes, the CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side, part # CM10900, will fit your 2013 GMC Yukon Denali.

I have included a video mirrors being installed on a 2010 GMC Yukon below.

expert reply by: Mark Smith

1

Answer 1

Yes, If you replace the chrome caps on your 2012 Chevy Silverado 1500 with the black plastic caps you mentioned then both the CIPA #CM10900 and K-Source #KS80900 will work. Between these two I personally like the K-source as I seem to see better…

view full answer...

Answer 2

The CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side Item #CM10900 are not a confirmed fit for your 2020 Tahoe. The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS80920 are a confirmed…

view full answer...

Answer 3

For your 2013 Chevrolet Silverado I suggest the CIPA Custom Towing Mirrors #CM10900. These are the most popular towing mirrors we carry for your truck and will fit whether you have manual or powered mirrors wtih and without the heating feature. See…

view full answer...

Answer 4

The part #CM10900 does not fit the chrome mirrors of a 2013 GMC Sierra. You would want to go with a door mounted tow mirror to bypass this with like the CIPA part #11650. I attached an install video for this mirror on a similar 2011 GMC Sierra as…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...