What are the Heights of Reese Weight Distribution Shanks RP54970, RP3215, and RP3344
Question:
What is the vertical length of these 3 shanks from top to bottom please. Thank you
asked by: Malcolm T
Helpful Expert Reply:
On Reese shank # RP54970, the height of the vertical part is approximately 7 inches. For Reese shank # RP3215 the vertical part is 12 inches. And on Reese shank # RP3344 the vertical part is approximately 16 inches.
If you need a specific rise or drop, let me know how much rise or drop you need and if you are using a round bar or trunnion bar system. I have including a link to our FAQ article that will explain how to measure for rise or drop.
Product Page this Question was Asked From
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Solution for Needing Replacement Reese Weight Distribution Shank
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Determining Trailer Tongue Weight
- Q&A: Brake Controller Install Harness for Prodigy P3 for 2023 Ford E-350
- Q&A: TorkLift SuperHitch Magnum Trailer Hitch Receiver For a 2024 Ram 3500 Pickup
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Distance from Pin Hole Center to End of Bar on Reese Weight Distribution Shank RP63971
- Q&A: Best Weight Distribution and Sway Control for 7606 lbs. GVWR Travel Trailer
- Q&A: Does Mounting Position of Weight Distribution Shank Used Affect Weight Capacity
- Article: How to Choose the Right Trailer Hitch Class