Receiver Hitch, Ball Mount and Trailer Wiring for a 2017 Dodge Grand Caravan
Question:
Hi! I am looking for an appropriate hitch for my 2017 Dodge Grand Caravan. The specs on the trailer are as follows: Trailer Weight: 305 lb. Total Carrying Capacity: 495 lb GVWR: 800 lb. I have been told by Sylvansport that the 2inch ball of the trailer should measure 15 to the ground to be level and the Tongue is 75 Long. My question is which receiver do I need and what trailer harness is best for this application? Thank you for your assistance!
asked by: William R
Expert Reply:
Of the available hitch options, I'd recommend a Class III hitch like the US made etrailer brand # e98854.
To put your trailer ball at the recommended 15 inch height, you'd need a ball mount like # 2753 which will place your trailer ball height at 15-3/4 inches. The rear of the vehicle will settle slightly when the trailer is hitched up, which will leave you right at level. For a 2 inch trailer ball, use # 63845. For a trailer wiring harness, use # C56331 to provide a 4 pole trailer connector.
I've linked to some install videos that you might find helpful.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 2000 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Trailer Wiring Harness Installation - 2017 Dodge Grand Caravan 118534
- Shop: Trailer Hitch
- Q&A: Will the Tekonsha Vehicle Wiring Harness 22121 for a 2017 Dodge Grand Caravan Charge Trailer Battery
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: 7 pin converter
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Roof Rack
- Shop: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: 68149
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: How to Choose the Right Trailer Hitch Class
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Search Results: 25580
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: 10k Dexter Replacement Hub for a 8-415