Step Motor Replacement For Kwikee 32 Series Steps in 2003 Motorhome

Question

Question:

I have a kwikee step motor that needs to be replaced, 293572 Series 32 and i do not find this series anywhere on your sight or others. can you help me, possibly need to upgrade the motor but to which one? it is on my 2003 Fleetwood Excursion. 2 step. Thanks for your help

asked by: Carrie J

0

Expert Reply:

Thank you for the photo and there is an option to replace the motor on your Kwikee 32 Series steps, though you'll need a full upgrade kit to the new style of motor:

- Motor Upgrade Kit for Kwikee Electric RV Steps # LC29VR

expert reply by: Kyle S

0

Older Kwikee Series 32 Motor
(click to enlarge)

Answer 1

Yes for your Series 32 steps the correct conversion kit is the part #LC29VR which is the same 781005 part number you mentioned.

view full answer...

Answer 2

I really appreciate all the information as well as the photos. After doing some research, I found that the exact replacement for your Kwikee steps with model number 903206000 are indeed the Kwikee 32 Series Electric RV Double Steps #LC372261. I also…

view full answer...

Answer 3

We've checked with Kwikee in the past for the linkage arm 151364 and the correct replacement is the part #LC379649. For the entire gear box and linkage the correct part number is the #LC379160 that you mentioned.

view full answer...

Answer 4

Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox…

view full answer...

Answer 5

The Kwikee Model 28 uses the gear box and linkage "B" so the correct part number you'd need is the part #LC379161.

view full answer...

Answer 6

I spoke with my contact at Lippert regarding your existing motor/gearbox model 5973820. He stated that the correct replacement motor is the Lippert Components Kwikee Step Motor Replacement Kit #LC379608. This is a direct replacement for the motor…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Step Motor Replacement For Kwikee 32 Series Steps in 2003 Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching