bing tracking image
Q & A Icon

Installation of Go Power Industrial Pure Sine Wave Inverter Charger  

Question:

i have a jayco eage ht with go powersolar. can I simply swap out my factory converter with this?Go Power Industrial Pure Sine Wave Inverter Charger - 3,000 Watts - 100 Amps - 12V Item # 34275013. secondy, suggestion is to wire close to battery. mine existing is ft away.

0

Expert Reply:

The Go Power Industrial Pure Sine Wave Inverter Charger, # 34275013 should be installed using 4/0 or larger wire. Your currently installed converter needs to be supported with wiring that supports this. We have the Installation Kit for Go Power Inverters with 400 Amp Fuse # 342GPDCKIT5 available if needed.

This should be installed in close proximity to the battery bank, but not in the same compartment. Wire the DC terminals to the battery bank, installation details are linked below. There are several ways to connect the inverter section to your RV's electrical system, but this is all dependent on your RV. Please review the options listed in the installation guide thoroughly to select the best option for your situation.

expert reply by:
0
Michael R

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>