Recommended Drop Hitch For a 2021 GMC Sierra 1500 AT4 Hauling a Boat Trailer

Question

Question:

Hi I have just swopped out my Land Rover Discovery 5 HSE 2018 model for a 2021 GMC Sierra 1500 AT4. I need a new hitch to take account of the approx 6" height difference between the 2 vehicles to keep my boat trailer level. I tow the following 1100lb trailer that I had made at Peterson Trailers in Tampa, FL: - 24/26 Tandem Torsion 7K can accommodate 5900# wet weight - Rear and center bunk configuration - 14foot Alloy Rims with Goodyear Tyres - Dual axle brakes w/ EOH unit 1600# PSI Marine Unit The boat is a Chaparral Sunesta 244 which has a dry weight of 4400lbs, so probably 5000lb wet with fuel and gear. I like the look of C83WR, but is the best option for my scenario? Thanks

asked by: Rob P

0

Expert Reply:

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount # C83WR is a great option as it will provide cushioning between your boat trailer and your 2021 GMC Sierra 1500 AT4. It is adjustable with up to 6" of drop to level your trailer. I do recommend using the InfiniteRule Lock Set for Curt Rebellion XD Ball Mount # IR47FR to secure the hitch assembly to your Sierra.

If you have the Multipro tailgate and would prefer a hitch you can leave mounted in your receiver the Tow & Stow 3-Ball Mount # BW49FR will allow you to do that. This hitch does only have a 4-1/2" drop so you will need to determine if that is enough to have your trailer level enough. This hitch does include a 1-7/8", 2" and 2-5/16" hitch ball if you tow more than just your boat trailer. The InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts # 34061775-D will secure this hitch to your Sierra.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, some drilling will be required in order to install the Blue Ox Base Plate #BLU35XR on a 2024 GMC Sierra 1500. The drilling itself is fairly minor. Removing the bumper and windshield washer fluid reservoir is going to be the more difficult part.…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, there is! To install a Prodigy P3 Brake Controller item #90195 in your 2024 GMC Sierra 1500 you will want the Plug-In Wiring Adapter for Electric Brake Controllers item #3064-P. This custom fit harness plugs in beneath your dash behind a panel…

view full answer...

Answer 9

The correct BAK Revolver X4s Hard Tonneau Cover for the CarbonPro bed on your 2024 GMC Sierra 1500 is the part #BAK34ZR. The part #BAK62VR you were looking at is for the same truck, but only if it does NOT have the CarbonPro bed.

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

There are base plates and a light kit that fit your 2023 GMC Sierra 1500; the base plates are from Blue Ox and fit all models of '23 Sierra 1500, including your Denali. The correct part is the following: - Blue Ox Base Plate Kit #BLU35XR Then for…

view full answer...