Wireless RV Backup Camera Monitoring System For a Jayco Eagle 5TH Wheel Camper

Question

Question:

is this back up camera compatible with a Garmin 760 ? Recently purchased a Jayco Eagle 5th wheel that is set up for this camera. We already have the Garmin 760 and hoping they are compatible.

asked by: Roger M

1

Helpful Expert Reply:

The Furrion Vision S Wireless RV Backup Camera # FCN48TASF is only compatible with the Furrion Vision S monitors. We have them available with two different screen sizes.

4.3" Furrion Vision S Wireless RV Backup Camera System # FOS43TASF
5" Furrion Vision S Wireless RV Backup Camera System # FOS05TASF

If you choose the 5" screen you can also add the LED Marker Light RV Side Cameras # FCE48TASL that will mount in place of the side marker lights near the front of your Jayco Eagle 5th wheel. The side cameras are great to help you see the blind side of the trailer when you are maneuvering into a tight spot.

You can also setup the cameras to work as a security system when you are parked at your campsite. By providing power to the camera's through the 7-way you can set your screen in your camper and allow you to view around your camper. The screen can be set to motion sensitivity so that it will awaken when one of the cameras senses motion.

Currently we do not carry any cameras that are compatible with the Garmin 760 that you have.

expert reply by: Bud M

1

Answer 1

It sounds like you just need to adjust the camera on the Furrion RV Observation Camera System part #FOS43TASF. The camera can be tilted up and down but not side to side. If you place a firm grip on the camera housing you can then tilt the camera up…

view full answer...

Answer 2

By replacing your FOC48TA-BL rear observation camera you will also have to upgrade your monitor as well. Your current camera uses a communication method that is no longer being used with the new Furrion Vision S cameras and monitors. You can get the…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 10

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Wireless RV Backup Camera Monitoring System For a Jayco Eagle 5TH Wheel Camper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching