LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
(50 reviews)
Price: $324.94
In Stock
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
Item # FCE48TASL
Retail:$374.47
Our Price: $324.94
You Save: $49.53
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (50)
- Q & A (0)
- Photos
Furrion Accessories and Parts - FCE48TASL
- RV Camera System
- Camera
- Side Camera
- Furrion
- Right Side Camera
- Left Side Camera
- Black
Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.
Features:
- Marker light cameras replace your clearance lights to improve visibility and obstacle detection for your RV or camper
- Minimize blind spots on both sides of your RV and help prevent accidents
- Gives you a 65-degree viewing angle
- Designed for use with Furrion Vision S backup camera system (FOS05TASF and FOS07TASF)
- DOT- compliant, waterproof marker lights with detachable cover allow easy access to replace your bulb
- CMOS sensors create high-quality digital video in full color
- 12 Infrared LED lights on the camera's housing provide night-time vision up to 39'
- Integrated IR cut filter blocks infrared light during the day to capture natural-looking images
- Motion detection triggers monitor (sold separately) to power on
- Durable, metal construction is dust resistant and waterproof
- IP65-rated to protect against dust and low-pressure water jet spray
- Simple installation - minimal drilling required
- Mounting hardware not included
- (8) #6 x 3/4" Self-tapping screws are recommended
Specs:
- Overall dimensions: 5-3/4" wide x 3-3/8" tall x 1-3/4" deep
- Mounting hole spacing:
- Vertically (left side): 1-1/8" center to center
- Vertically (right side): 5/8" center to center
- Diagonally: 3-1/8" center to center
- Resolution: 720 x 480
- Voltage: 12V - 24V DC
- Wire length: 5"
- 1-Year warranty
Marker Light Side Cameras
Designed for use with the Furrion Vision S wireless RV backup camera systems (FOS05TASF and FOS07TASF - sold separately), these marker light side cameras are the ultimate upgrade for your RV's side marker lights. They give you the same DOT compliant marker lights with the added benefit of waterproof side cameras with LED night vision and motion detection. The cameras enhance visibility and minimize blind spots by giving you a wide 65-degree viewing angle. They also have detachable light covers for easy access to replace your bulbs.
Infrared LED Night Vision
Each camera has 12 infrared LED night vision lights that produce a clear, quality picture and give you the flexibility to back up your RV in low-light conditions at dusk or in complete darkness at night.
Motion Detection
When used with your Furrion Vision S wireless RV backup camera system (sold separately), the motion detect feature on the system's monitor allows you to set the motion sensitivity level of your cameras to low, medium, or high. On the low setting, your cameras will not detect a pesky raccoon until it's very close or already in your garbage, whereas on high setting, they will detect the raccoon approaching from further away. Your monitor will automatically illuminate to alert you once motion is detected.
2021123791 Marker Light RV Side Cameras for Furrion Vision S Systems - Night Vision - Qty 2
Replaces 733325 and 110469
Alt 405206ET
Alt FCE48TASH
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Arrived Damaged
- Defective
Customer Reviews
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2 - FCE48TASL
Average Customer Rating: 4.7 out of 5 stars (50 Customer Reviews)
Waterproof marker light side cameras with night vision are designed for use with Vision S 5" and 7" systems. 65-Degree viewing angle and motion detector minimize blind spots. Detachable light cover allows easy access to replace your bulb.by: R03/24/2024
Work great very wide angle.
covers two lanes.
by: Bill C.03/29/2019
Great product! Easy to install and works great . The picture is very clear and system was easy to pair up with my rear view camera. Instructions were very clear. I do wish the wires were longer . I chose to install above existing light as I wanted the camera higher than the factory lamp was located.
by: Robert02/07/2024
Works great and was easy to install, excellent safety device
by: Paul08/26/2020
Everything went smoothly and received the product in just a few days. It took less than 30 minutes to install both cameras after watching an online from strainer.
by: Kenneth 08/27/2022
Work great. Easy to install. No issues syncing with monitor.
by: Joseph 03/27/2023
We wanted these for our new 5th wheel that was prewired for them. It was cheaper to upgrade our 4.3 backup monitor to The 7” and add the side cameras versus buying a new setup.
by: Charles 06/19/2021
Installed them today. My 5th wheel was pre wired so I just had to add on the cameras to the existing side marker lights. They had a plug there in the cameras place. Did notice you had to have the truck hooked up to the 5th wheel in order to get power to the cameras. Then the pairing to the monitor was very easy.
Charles E.
6/20/2022
Amazing! We pull a 39 5th wheel with our dually as if its not there! It was easy to assemble and fit perfectly into our new trucks puck system! We bought the size bigger than we needed, works great!
by: Steve K07/08/2020
These cameras have very good images.
Be aware when you place them as Awning Arms vs camera location can restrict your view. They work well in all light conditions and take the worry out of what is there behind & beside, especially on the Offside. Furrion’s Prodcut support is excellent should you need it. Install & pairing are relatively easy.
Adding these camera’s to the review/backup just completes the all round view.
Steve K.
7/10/2021
Would not be without them. Makes maneuvering easier and Mike eases directions from spotter.
by: David12/05/2021
Never got them to work like they should before we traded the RV. It had something to do with trucks running light voltage on my 2021 GMC Denali being too low. It could be fixed using a relay and powering them from the trailer batteries and using the truck lights to trigger the relay. But since we decided to trade the rig I didn’t bother adding the relays. They did work well when I tested them being powered directly off the trailer battery. The trucks cameras are so good if I had to do it again I probably wouldn’t buy them. BUT if you don’t have side cameras on your truck you will like them.
by: Chuck H.02/20/2020
Bought the side marker light cameras & rear view camera for a new 5th wheel that we took on a 2 1/2 month; 11,000 mile trip. One of the side cameras malfunctioned but was replaced at no cost to me. The rear view camera is very useful and works very well. The side cameras are less helpful. I have a better view of what is going on next to me by using the side mirrors. Also, the rear view camera is better at seeing what’s behind me and what is about to pass on either side, it also let’s me know when I can pull back into my lane when I’m passing someone. Although I can have all three cameras displayed on the monitor at the same time, the pictures are so small as to be useless when driving. Switching from from rear view to side view takes attention from driving and several seconds to accomplish. Additionally, the passenger (right) side camera’s view is partially obscured by the arm for one of the awnings on that side.
Having said all that, the side marker cameras work well, but are not as useful as I’d hoped they would be. Knowing what I now know, I probably would not purchase them again.
by: Dennis10/21/2019
Extremely happy with the product. Very easy to install and working great. Thank you for good service and speedy delivery.
by: BillC09/17/2020
These are great for providing a wide view of blind spots. This is useful for backing up as well. In my setup, I have to have the lights (or parking lights) turned on for them to work, but that is a minor issue.
by: Darrel03/30/2022
Cameras work great. They are every bit as good as the OEM equipment on our car. I drive with them on continuously to be aware of traffic around my 5th wheel.
by: Castaway12/11/2022
Easy to install, easy to use, works great! Great customer service by etrailer as well! Really well done!
by: Ronald03/12/2019
Excellent cameras. Has great wide angle view. Like the wireless feature. I give the cameras five stars. I just didn't care for the way they shipped the product. Yes you get free shipping, but they ship it UPS then transfer it to the post office which takes an extra two days to get. Should just have left it with UPS delivery only. That's why I gave only four stars.
by: Kenneth 07/23/2022
Easy install, works well on the road and helpful for a little extra blind spot view when backing in.
by: Robert03/15/2019
Very easy install on a 33’ Tralee trailer. But just an FYI, you’ll need to go out and buy your own screws. Otherwise great cameras and good picture. As far as reception I was able to get about 300’ away before I saw the slightest flicker. Definitely buy the 7” monitor for sure! Love doing business with etrailer! My goto for everything.
by: Jim06/03/2022
Game changer, a little difficult to pair. Turn camera and screen off, try again(3 times=success)! Now they pair, everytime.
by: Fran 08/04/2022
Just installing them now. Very easy installation. Can't wait to see how they are working going
222
down the road.
by: Anton 08/15/2021
would be nice to have the cameras adjustable but everything is working great
by: Fred 06/09/2021
Great customer followup Sharon kept me personally informed about the status of my order. I was on a tight schedule, I feel the order was expedited, and delivered a day earlier than promised. Thank you
Fred
6/10/2022
Failed again, the 3 pin contact between the housing and camera is not water proof. The contacts corrode and the unit fails. Takes about a year to fail.
Katrina B.
7/8/2022
I am sorry that this unit has failed you. I have gotten in contact with the manufacturer ad they have confirmed that the unit is indeed waterproof and the contacts should not be in the open to get water on them. The side cameras will need replaced. I have sent your information over to them for them to get into contact with you on a possible replacement.
by: David 02/20/2023
Easy install..
by: Jeff 11/23/2022
Great prices. Great service. Fast shipp ing.
by: Randy 08/11/2022
They do help. Akers driving a bit safe r.
by: John05/01/2021
Works like a champ!
25
50
Show More Reviews
See what our Experts say about this Furrion Accessories and Parts
- Furrion Vision S Observation Camera System For a 2021 Eclipse Attitude 21FB-LE Toy HaulerWhile your 2021 Eclipse Attitude 21FB-LE toy hauler did not come prepped from the factory for a Furrion camera system you can still easily add it to your camper. To get power you will simply need to tie into the wiring for the running lights that are already on the rear of your camper. You will able to mount the camera below the light and tie into the light. We have the Furrion Camera system available in a 4.3" Monitor # FOS43TASF or the 5" Monitor # FOS05TASF. If you choose the 5" version...
view full answer... - Replacement Furrion Camera Systems For Obsolete Furrion FOD43TA-BLThe image quality diminishing over time is most likely an issue on the camera side. What I have generally seen is the camera lens will get dirty and yellow over time which will begin to cause the image to get less sharp and the image quality to diminish. You can try to polish the lens on your camera to improve the image quality. If your image quality does not improve you will have to replace both the screen and monitor due to Furrion changing the way their screens communicate with the...
view full answer... - Will the Furrion RV Observation Camera System Work with the Aluminum Body on a 2018 Ford F-250I spoke to my contact at Furrion about the Furrion RV Observation Camera System w/ Monitor and Bracket part # FOS05TASF and they stated that you may have interference issues with the aluminum body on your 2018 Ford F-250. They did not report of any issues with this but it is a possibility. Unfortunately, that is just the nature of a wireless camera system. It will be the same for the Furrion RV Observation Camera System w/ Monitor and Bracket as it would with any other wireless camera system...
view full answer... - How to Install Rear, Garage and Side Cameras on Grand Design Momentum 395S Toy HaulerFrom what I was able to research, the Momentum comes pre-wired for a Furrion rear camera only. The Furrion Vision S Wireless RV Backup Camera System # FOS05TASF allows you to monitor up to a total of 4 cameras, so you can add the two side cameras with part # FCE48TASL and then an additional camera to monitor the inside of your toy hauler with part # FCN48TASF. The side cameras and garage camera would need to be hardwired to your running lights on your RV for observation. I've attached...
view full answer...
- Recommended Monitor Size for Furrion Vision S Wireless Camera SystemI recommend going with the 5" # FOS05TASF monitor screen because you can only use 1 camera with the 4.3" # FOS43TASF screen. With the 5" option you can add an additional 3 cameras with parts # FCE48TASL and # FCN48TASF so that you can see behind you, on either side, and then use the 4th camera wherever you see fit. If you like the idea of the side marker lights right off the bat then these are offered packaged with the 5" # FCE48TASL-05. I personally like the larger monitor better because...
view full answer... - Was 2018 Grand Design 230RL Pre Wired for RV Camera SetupYes, your 2018 Grand Design 230RL does have the observation system camera wiring ran to the running lights of the trailer for installing the Furrion Vision S system part # FOS05TASF. This allows you to be able to see behind you at any time by just turning on the head lights or running lights. Since not all trailers have a reverse light circuit and that as a trigger circuit would limit how you could use the camera setup that is why it's not ran to that circuit.
view full answer...
- How Does Furrion Vision S Side Camera Wire Up to Trailer WiringFor the Furrion Vision S side camera/marker light kit # FCE48TASL the brown wire goes to running light circuit for the light to come one, the black goes to ground, and the red is your trigger wire for the camera to turn on. This allows you to decide what circuit you want to activate the camera. You can run it to the running lights so that any time you want the camera to be selectable from the monitor all you have to do is turn on the running/head lights. This is the most common choice and...
view full answer... - Will Awning Tracks Interfere With Field of Vision on Furrion Side Marker CamerasI think most coaches that this would be an issue on, have the awning really close to the side marker light, but since the camera of the # FCE48TASL is angled outward and your awning track is quite a ways away you really shouldn't have any problems. I've linked the video that Dave did on the installation of these cameras and it shoes the outward angle a little bit better, but it's definitely going to help combat what you're (rightfully) concerned about and I don't see this as being an issue...
view full answer...
- Recommended Backup/Rear-view Camera for a 2020 Palomino Truck CamperIf you have a pre-existing mounting bracket on your 2020 Palomino truck camper then that means it is pre-wired for a Furrion Vision S camera system. These are wireless and come with 2 different monitor screen sizes: 4.3" - # FOS43TASF or 5" - # FOS05TASF. In the past the 4.3" monitor has been the most popular, however the 5" option gives you the chance to add some extra cameras, like the Side Marker Light Kit # FCE48TASL, if you would like to. The 4.3" option is only compatible with...
view full answer... - Correct Back-Up Camera System for a Forest River Wildwood FSXThe Forest River Wildwood FSX Trailers are pre-wired for the Furrion Vision S Wireless RV Backup Camera Systems; part # FOS43TASF for 4.3" screen or part # FOS05TASF for 5" screen. Please note, if you get the 5" monitor then you can add the Marker Light RV Side Cameras part # FCE48TASL for increased visibility. The Furrion Vision S Wireless RV Backup Camera Systems are plug and play so installation will be a breeze, just pick your desired screen size and you are good to go.
view full answer... - Installation Videos for Furrion LED Marker Light RV Side CamerasUnfortunately, we do not have a video specific to your GD310GK for the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL. I went ahead and linked two videos of two different 5th wheels. Hopefully, the information in those video can help you with your GD310GK.
view full answer... - Camera Recommendation for Back of 2020 Grand Design Imagine 2800BH to Monitor While TowingYour 2020 Grand Design Imagine 2800BH is pre-wired for the Furrion Vision S system like part # FOS05TASF. This is one of the most popular camera systems because of how well it works for campers, plus you have the ability to add up to 3 more cameras to the setup. A lot of people like using the Side Marker Light Camera Kit # FCE48TASL to see traffic on your sides, and then add the 4th camera with part # FCN48TASF wherever they would want. This is a wireless system so you just need to have...
view full answer... - Complete Furrion Wireless Camera System for a 2019 Grand Design Momentum 395MYes, we do have the 3 cameras that you can add to your Furrion RV Observation Camera System # FOS05TASF on your 2019 Grand Design Momentum 395M. The side marker lights/cameras are part # FCE48TASL while the camera you would use over the door is the same as your rear camera # FCN48TASF. These cameras can be used both while you're driving and also as an observation system for when you are at the campsite. Attached are some review and installation videos that you can reference.
view full answer... - Recommended Furrion Backup Camera for 2021 RV Prepped For Furrion CameraFor your 2021 RV that is prepped for the Furrion camera I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF as it has the largest screen available for this system giving you the best view of what is behind you, and includes everything you need for the install. The # FOS05TASF is compatible with up to 4 cameras, so you can add 3 additional cameras in the future using # FCN48TASF or # FCE48TASL to see more of what is going...
view full answer... - Replacement Furrion Vision S Display and Rear Camera For a 2021 Jayco North Point 5TH Wheel CamperYes, you can purchase the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF with the rear camera and monitor that will pair to your Side Cameras # FCE48TASL that are already on your 2021 Jayco North Point 5th Wheel. Since these are all the Vision S components they will be compatible. I do recommend pairing the rear camera to your display before mounting the rear camera. There is a power point on the display harness that you can power on the camera for pairing. This makes it...
view full answer... - How Does Furrion Vision S Side Camera w/ Marker 2 Cameras # FOS05TASF Typically WireYour current clearance lights do only have a power and ground for the operation of just the light. The side marker Furrion cameras # FCE48TASL do have three wires. Two for the light operation which matches what your trailer lighting has and an additional power wire that the camera gets to power it. The camera shares the ground wire with the light.
view full answer... - Recommended Wireless Backup Camera for my #8 Foot Sundowner and my 2500 HDThe Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS05TASF is a great and reliable system to use for the long distance connection situations. We have never ran in to any connection issues with any length camper. Of course this kit only has one camera but you can easily add the Furrion Vision S Wireless RV Backup Camera w/ Night Vision part # FCN48TASF to add to the truck to get a view of the gooseneck ball and coupler. To go a step further the Marker Light...
view full answer... - Can 5 Furrion Vision S Monitor Pair with Older Furrion Wireless Camera SystemThe part FOS48TA-BL that you referenced is the older model of the Furrion observation system and unfortunately is not compatible with the newer Vision S system. On the bright side though since you are wanting to go with the Vision S 5" monitor you have the option to utilize more than one camera if the need arises. So, for just the monitor and camera you need part # FOS05TASF and then you can add the Marker Light RV Side Cameras # FCE48TASL and then another Vision S Camera # FCN48TASF. If...
view full answer... - 2019 Jayco 17rk Hummingbird Backup Camera SystemThe backup camera that Jayco prewires their trailers to work with is the Furrion Vision S system. This comes in 3 different options. The 4.3 inch screen is compatible with up to 2 cameras but does not have the split screen option. The 5 inch has the ability to use up to 4 cameras so you can add side view # FCE48TASL and can allow for the quad view. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - 4.3" Screen # FOS43TASF Furrion Vision S Wireless RV Backup Camera...
view full answer... - Side Camera Kit Setup for Trailer to Help Know When Vehicles are Completely PassedYes, the side camera kit part # FCE48TASL can be used as a way to know when you've passed someone on the highway with the kit # FOS05TASF. We also have an entire kit that includes the side cameras, a rearview camera, a 5 inch monitor plus motion sensors with the part # FCE48TASL-05 which would be your best option. This will trigger the side cameras automatically when you are passing a vehicle, or one is passing you.
view full answer... - Trailer Rear View Camera Compatible with Forest River 167RBUnfortunately there is not any compatibility with your dash screen with any of our systems. The best option for your prewired trailer is the Vision S system from Furrion. I recommend the 5 or 7 inch system because you can add more cameras if you want to add side cameras at some point. I recommend the # FCE48TASL-05 if you want the side cameras or use # FOS05TASF for just the rear camera. If you do the latter, you can at a later date add # FCE48TASL.
view full answer... - Furrion Side Cameras Come On When Brake Pedal is PressedIn regards to the LED Marker Light RV Side Cameras part # FCE48TASL, there are only three wires you should be using. The brown and red wire get tied together and then attached to the running light power wire coming from the old light, the black wire get tied into the ground wire coming from the old light. I recommend checking over all the wiring to ensure you have it wired as such. I did a video on this exact process if you want to fast forward to the 10:00 mark in the video linked below.
view full answer... - Side Marker Camera Recommendation For A 2022 Jayco 166FBS That Is Prepped For Side CamerasThe camera on Furrion's website is the same as the Replacement RV Side Marker Light Camera w/ Night Vision for Furrion Vision S System # FR28NR that we offer, but it does not have the side marker light like # FR28NR has. Take a look at the two pictures attached and you can see where the side marker plugs into the camera that Furrion offers. To wire the # FR28NR to your trailer, you're going to just need to connect the bare ends of the wires to the nearest 24V /12V circuit. For the complete...
view full answer...
- How To Install Furrion Marker Light RV Side Cameras On Trailer With Corrugated Side WallsIn regards to the Marker Light RV Side Cameras part # FCE48TASL, they would indeed need a flat surface in order to mount. If you have a trailer with corrugated side walls then you'd simply need to make some sort of spacer to allow for the light/camera to install level. I suggest some metal washers under the mounting holes.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Charles A
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Adam Y
Updated by:
Noah M
Edited by:
Amanda M
Test Fit:
David F
Test Fit:
Kevin C
Written by:
Halie H
Installed by:
Michael B
Installed by:
Evangeline M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
8/28/2023
One camera failed but Furrion quickly replaced under warranty. Furrion was easy to deal with. Honestly, I dont use the side cameras. My mirrors can be set to see both sides of my 5th wheel. So these are just a nice to have rather than a neccessary item. The rear view camera I count as a requirement.