CE Smith Trailer Idler Hub Assembly w/ Case # CE13315 For Loadrite Trailer With 2,700LB Axle
Question:
Will this work on my loadrite which has hub stamped BT-150A inquiring about product: # CE13315 Mine has has inner 1.25inch inner and outer 1 inch straight spindle
asked by: Scott C
Expert Reply:
According to Loadrite your BT-150A fits a 1.063" straight spindle. I believe the 1.25" measurement you have is for the grease seal. The CE Smith Trailer Idler Hub Assembly w/ Case # CE13315 that you are inquiring does have the correct size bearings for that spindle. You would need to replace the Grease Seal # 34823(1.249" inner) for the grease seal that came on the hub to properly fit your spindle. We currently do not have any hubs that have the same size bearings with the correct grease seal you are needing.
The Seal Puller # PTW1219 will make removing the seal that is already pressed in much easier.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
- Video: Review of CE Smith Trailer Hubs and Drums - Hub - CE13315
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Search Results: 11029
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: tie down parts
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: 1/2 stud
- Q&A: How To Find Replacement Idler Hub for Load-Rite Trailer with 2,700 Lb Axle
- Shop: Washer For 1" Spindle
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1 Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: Replacement Idler Hub For Tie Down 11029C On 1-1/16" Straight Spindle with 5 on 4-1/2" Bolt Pattern
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - DL21792 Review
- Q&A: How to Select Replacement Grease Seals for Long Chih Trailer
- Search Results: lug nut
- Search Results: stud
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Q&A: Tools Needed For Replacing Trailer Hub Grease Seals and Bearing Races
- Video: Performance Tool Seal Puller Review
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Search Results: ce13311
- Search Results: grease cap 178