Which Trailer Hitch Fits 2020 Kia Sorento

Question

Question:

I want to get a trailer hitch for a 2020 Kia Sorento. Your products are designated SX models or excluding SX. The paperwrk for my car says S/LX. The is no designation on the car body itself.. Do I need an SX model or an excluding SX trailer hitch? Thank you

asked by: Bobby W

0

Expert Reply:

The etrailer hitch part # e98843 that you referenced fits the SX and non-SX models so it would work great on your vehicle that is not an SX model.

expert reply by: Jameson C

0

Answer 1

The best trailer hitch for a 2020 Kia Sorento is the etrailer Trailer Hitch Receiver part #e98843 because unlike the other options for this vehicle it has a dull finish which we have found to not stand out nearly as much as the other glossier…

view full answer...

Answer 2

When we installed the etrailer.com Trailer Hitch Receiver part #E98843 on a 2018 Kia Sorento we found that the distance from the ground to the bottom of the receiver tube opening is around 11". We have not yet had a chance to install this hitch…

view full answer...

Answer 3

For your 2020 Kia Sorento I recommend the etrailer Trailer Hitch Receiver #e98843. This custom fit trailer hitch has a simple no drill bolt-on installation. It has a maximum gross trailer weight capacity of 5,000lbs and maximum tongue weight capacity…

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver item #e98843, for a 2020 Kia Sorento, can be used with the Curt Friction Sway Control item #17200. You will need to attach the Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV item #RP26003 to…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The maximum tongue weight capacity for a 2020 Kia Sorento V6 is 350 lbs. This is the figure provided in the owner's manual so that is the bottom line. The trailer hitch options for this vehicle do offer tongue weight capacities greater than 350…

view full answer...

Answer 7

I've looked through the towing section of the owner's manual for your 2019 Kia Sorento, and didn't see any prohibitions against using weight distribution. Typically when the hitches offered for the vehicle aren't rated for use with a…

view full answer...

Answer 8

I can't recommend a weight distribution hitch for your 2019 Audi Q5 because your vehicle design prohibits it. I can recommend the Draw-Tite #76183 standard Class-III hitch paired with a Curt #17200 Sway Bar. The benefit of using a weight…

view full answer...

Answer 9

We don't actually carry the Eaz-Lift Weight Distribution Systems but I can definitely help you add sway control to your setup. Even if you think your towing setup is level without the existing system I still recommend keeping it because it's…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The engine itself doesn't quite make the difference, but the model does. If you have the SX model of the 2019 Kia Sorento I recommend the Class III etrailer.com Trailer Hitch #e98843 because it has a matte black finish that does a great job of…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Which Trailer Hitch Fits 2020 Kia Sorento

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching