Replacement Shroud For Coleman Mach 3 RV Air Conditioner

Question

Question:

I am look for an roof AC Shroud for coleman Mach 3 6759A722

asked by: Karen L

0

Expert Reply:

The correct replacement shroud for your Coleman Mach 3, is the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach RV Air Conditioners # MA00-325001.

expert reply by: Bryce D

0

Answer 1

The MaxxAir Tuff Maxx Coleman RV A/C Replacement Shroud #MA00-325001 replaces all 11,000, 13,500 and 15,000 BTU Coleman Mach 1, Mach 3 & Mach 15 models.

view full answer...

Answer 2

Based on your model number the Replacement RV Air Conditioner Cover #MA8335A5261 is the correct shroud for your Coleman 7300 series.

view full answer...

Answer 3

Based off the model number you provided it looks like you've got a RVP Coleman unit, which means the replacement shroud you need is the part #MA8335A5261.

view full answer...

Answer 4

Thanks for getting me the model number! Based on that we know you have the RVP Coleman unit which means the replacement shroud you need is the part #MA8335A5261.

view full answer...

Answer 5

For a replacement shroud on your Coleman 7300 series AC you can use the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover #MA00-325001. Your 7300 series should be a Mach 3 which falls under the fit for this shroud. However, I do recommend…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Replacement Shroud For Coleman Mach 3 RV Air Conditioner

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching