Is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box Safe  

Installing the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box #325-GH-8045 would not void the warranty of your camper. While some adapters for fifth wheel hitches do this style is different from them and would not. The ones that…

Thanks for the picture and additional information! I just heard back from my rep at Lippert and you are correct your Keystone Raptor does have a 1116 pin box. You will need the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY23FR. Your math is…

To know what pin box will replace your MORryde pin box you'll first need to identify the bolt pattern. To do this you can follow the steps in the attached pin box identification article. This article will show you the different styles of pin…

I went ahead and reached out to Lippert, and they confirmed that you need automatic transmission fluid Dexron III or Mercon 5 fluid. This works with their hydraulic auto leveling system. With that being said, I do not recommend using the hydraulic…

Since you actually have a Lippert 1116 pin box, the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 that you ordered, which fits a 1621 pin box, is not going to work with your Keystone Fuzion 403 since the two pin boxes are not…

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 18,000 lbs - 3.5K TW #325-GH-8040 weighs 125-lbs. However, after speaking with the tech and warranty department over at Lippert, the Gen-Y pin boxes are not…

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is an approved replacement for 1621 and 1621HD pin boxes.

The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube…

I understand your concern. I called Lippert to verify that the 132 Ft-lb of torque and use of Locktite is still valid. They said that was the requirement and there were no alternative instructions. The assumption is that this is the method they used…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.