Correct Inner and Outer Bearing for EZ Loader Trailer with L44649 Outer Bearing and 168255TC Seal
Question:
I have a 2008? EZ Loader Two Axle boat trailer, The front axle outer bearing is marked L44649, and the seal on the inner side is marked T23984. The rear axle outer bearing is marked L44649?- the L is not visible and the first 4 is very faded, and the seal on the inner side is marked 168255TC. I looked these parts up on your site and found a L44649 kit, a 168255TC seal, but no T23984 seal. However further info on your site talks about the L44649 being used for inner and outer on a BTR spindle, but only as the outer on a 84 spindle. Im not sure what Ive got. Do I need to take them apart again and get more info on the spindles? Do I get the L44649 kit and use L44649s for inner and outer, and use the 168255TC seal on both? Also, which model/size bearing buddy should I get for these bearings?
asked by: Greg C
Expert Reply:
I do have an option for you but you will need to convert from oil to grease since they don't make stuff for oil in this size anymore. That said, I can confirm based on the info you provided that you need to use part # L44649 for the outer bearing and part # L68149 the inner bearing, not two of the part # L44649 inner/outer bearings. Then for the grease seal you will want to use the part # 168255TB. In order to switch from oil to grease you'll also need the part # BB1980A which is for a 1.98" hub bore.
![Conner L](https://images.etrailer.com/static/images/catg/people/1234_tn.jpg)
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
- Article: How to Rent an RV
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Article: How to Charge RV Batteries
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Equalizer Replacement Options for Dexter 13-122 Equalizer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can 12 Volt Battery Replace Two 6 Volt Batteries
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing