Tow Bar Wiring Kit for 2013 Lincoln MKZ

Question

Question:

Towed car-2013 Lincoln MKZ hybrid. Buying Blue Ox Patriot3 and Blue Ox baseplate. What wire set-up is needed for correct connection.RV has 7 to 6 connection. I am buying RM677 tow bar this week. Thank You

asked by: Mike A

0

Expert Reply:

Since you have a 6-way connection that you want to plug tow bar wiring into the correct kit you'd need is the part # RM-152, for the 6-way socket part # RM-910030-7, and then for the mounting bracket # RM-910030-5.

expert reply by: Jameson C

0

Answer 1

What you are going to need is the part #H20036 and then wire the blunt cut wire end to the part #PK11604. We don't have the exact adapter you are looking for, but this should work well for you.

view full answer...

Answer 2

To install the RoadMaster 6-Wire Trailer Connector, part #RM-910030-7, you will need a bracket. The bracket I recommend is the Roadmaster Bent Electrical Socket Bracket, part #RM-910030-5. You need to find a flat surface that can support the…

view full answer...

Answer 3

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part #HM56200 which is a it for a 2015 Jeep Wrangler only comes with a 4-way. There aren't any custom fit options that come with a 6-way but all you will need to convert the above is cut…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Tow Bar Wiring Kit for 2013 Lincoln MKZ

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching