Replacement 2 Inch Convert-A-Ball Compatible With 1 Inch Shank

Question

Question:

I need a 2 in stainless convert-a-ball for a 1in shaft I see one on your web page but not sure if it is for a 1 in shaft

asked by: Robert J

0

Expert Reply:

I'm guessing you already have the 1 inch shank, and you're looking to add a 2 inch stainless Convert-a-ball, is that correct?

If so, you'll want to use # 401B which is compatible with 3/4 or 1 inch diameter shanks.

expert reply by: Mike L

0

Answer 1

The only 2" hitch balls with 1" diameter shank that we offer which are made in the USA are from Convert-A-Ball who uses a unique interchangeable ball set like the Convert-A-Ball Interchangeable Ball Set part #902B. This set comes with a…

view full answer...

Answer 2

Thanks for reaching out, Bruce! The Convert-A-Ball Interchangeable Ball Set #902B comes with the 2-1/4" standard shank length so it's the kit you're looking for. The XL kit, part #105TB, comes with a 3" shank length just or…

view full answer...

Answer 3

The internal pins in the balls are not available separately but you can replace the balls that include the pins. For a 2" ball you'll need part #400B (nickel-plated steel) or #401B (stainless steel).

view full answer...

Answer 4

Convert-A-Ball doesn't offer their Interchangeable Trailer Ball Sets with a 1-1/4 Inch diameter. If you're wanting to use a ball mount with a 1-1/4 inch hole for the trailer ball, you could use a Hitch Ball Bushing like #58184, which would…

view full answer...

Answer 5

Yes, we have the Convert-A-Ball Interchangeable Hitch Ball - 2 inch Diameter - Stainless Steel, #401B. This ball will work with the Convert-A-Ball Interchangeable Ball Set - Stainless, #906B.

view full answer...

Answer 6

The Convert-A-Ball Interchangeable Ball Set #902B can install on any class of ball mount that has a 1-inch diameter ball hole and whose ball platform is not too thick for the shank which is 2-1/4-inches long. This multi-ball part will fit properly on…

view full answer...

Answer 7

You are correct! The thickness of the ball mount platform is 1 inch. We have hitch balls that will fit with capacities up to 7,000 lbs. The hitch ball shank length needs to be at least 2 inches. We also have convert-a-ball hitch balls that go up to…

view full answer...

Answer 8

There is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item #906B, would give you…

view full answer...

Answer 9

We do in fact have both a nickel and stainless steel version of our Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank. The nickel version is part #900b and is the more economical of the two. The stainless steel version is part #902B…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Replacement 2 Inch Convert-A-Ball Compatible With 1 Inch Shank

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching