Measurements Needed to Determine Replacement Bearings Without Having Old Bearings Numbers
Question:
I bought a trailer that had been taken apart and left. It has just the spindles. I also have a custom built oxy-acetylene cart that has hubs, wheels 3-bolt and tires Michelin X 135SR15 ZX suitable for a trailer. What measurements do I need to get bearings that will work for this setup?
asked by: Cody
Expert Reply:
I advise measuring the two spindles that you have and making sure that the parts that you are wanting to interchange will be a compatible fit. I have included a photo that shows where where to take these measurements on your exiting spindles. These measurements will need to be as precise as possible, so I recommend using digital dial calipers.
If you have determined that the two spindles are similar in size and you can interchange the parts that you needed, then based on the measurements of your spindle you can then determine which bearings would be best for the trailer that you are constructing.
If after measuring the spindles and hubs that you intend to use and you determine that they are not considered a compatible fit; then the measurements on the spindle will indicate which hubs as well as bearings would work with that spindle.
![Rachael H](https://images.etrailer.com/static/images/catg/people/541_tn.jpg)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Sway Bars
- Shop: Gooseneck Hitch
- Shop: Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Search Results: 1139~115
- Shop: Brake Controller
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Video: Command Electronics Trailer Lights - Tail Lights - 328-003-6017X Review
- Video: Optronics Trailer Identification Light Bar Review
- Video: Diamond Trailer Lights - Tail Lights - DG52720PB Review
- Video: Optronics Trailer Lights - Tail Lights - STL69RRXB Review
- Search Results: c99dr
- Search Results: 4 inch drop receiver
- Search Results: e38kr
- Search Results: dust caps
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Q&A: Availability of Replacement for Trailer Hub/Brake Drum 92865A-1
- Q&A: Slide Topper Recommendation for Box Width of 90.5 Inches on Gulf Stream Vintage 23BHS
- Shop: Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K
- Search Results: 23~410~411
- Search Results: k2r1258l12
- Video: B and W Turnoverball Gooseneck Trailer Hitch Installation - 2022 Ford F-250 Super Duty
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer