Trailer Roof Vent Cover for a Ventline Ventadome Roof Vent

Question

Question:

I need A roof vent cover that will fit over a Ventadome roof vent # V3094 made by Dexter. A standard Max-Air cover will NOT fit. My RV dealer seems to be having trouble finding one for my NEW 2022 Jayco camper.

asked by: Robert T

1

Helpful Expert Reply:

Since you mentioned that the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933069 will not fit your Ventline E-Z Lift Ventadome Trailer Roof Vent # V3094-603-00C I recommend going with the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR.

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR works with standard and high-powered vents from other manufacturers that measure 14-1/4" x 14-1/4" at the roof opening and has slightly larger dimensions at 23" long x 19-1/2" wide x 10-1/4" tall.

expert reply by: Scott S

1

Answer 1

You would need the standard MaxxAir Vent Cover part #MA00-933069 as a vent cover for the top of your Ventline E-Z Lift Ventadome #V3094-603-00C.

view full answer...

Answer 2

Yes it is super simple! The Complete Propane Tank Holder Mounting Kit for 20-lb Tanks part #37220BL is secured to the tongue of the trailer using self tapping screws. #14 self tappers have always worked out really well and they will go into the…

view full answer...

Answer 3

The correct replacement dome lid for V2094 #V2094SP-34 would be part #BVD0449-A03.

view full answer...

Answer 4

The Replacement Step Latch #MR97BR can only be used on the left side of a MORryde Step Above step.

view full answer...

Answer 5

I recommend installing a MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933066 on the roof of your RV as it has a bug screen built in that will keep out bugs. We currently do not have a screen that is confirmed to fit the V771232-C Heng's…

view full answer...

Answer 6

For RV application I prefer the Go Power brand of products. If your camper is pre-wired from Jayco I believe they are using the same brand. There is typically two options available in pre-wired from the factory for "solar ready" either…

view full answer...

Answer 7

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Trailer Roof Vent Cover for a Ventline Ventadome Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching