Can Rotopax Mounting Kit for Yakima OverHaul HD Fit Thule Bars

Question

Question:

Will this adapter also mount to a Thule Top track, the standard mount for Leer shells? Want a simple cheap way to mount a rotopax gas can to my leer shell.

asked by: Kaya

0

Expert Reply:

Yes, since the T-slots of Thule racks and Yakima racks are the exact same you can use the Rotopax Mounting Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01167 in the Thule tracks.

expert reply by: Jameson C

0

Answer 1

The Replacement Mounting Hardware for Recovery Tracks for Yakima Ladder Racks part #Y83FR uses M8 hardware per Yakima.

view full answer...

Answer 2

This is a little tricky as the Inno Shaper 100 Roof Cargo Basket #INXA569 doesn't have a specific cargo net made for it. The best recommendation I have in the way of a net is the Reese Stretchable Cargo Net #H9500100 and just making sure you wrap…

view full answer...

Answer 3

To maintain your air pressure in your air helper while you drive you will need the Air Lift WirelessAIR Compressor System #AL74000EZ. This system has a smart manifold which will maintain the air pressure within 3psi while you drive. The Air Lift…

view full answer...

Answer 4

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 5

It might be possible to use the Long Bed Yakima SideBar Side Rails #Y01154 for the OverHaul Rack #Y01151-57 on your Ford F-150 Raptor with the short bed but it's going to depend on how much space you have between the uprights when they're…

view full answer...

Answer 6

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 7

Yes, the Yakima OverHaul ladder rack does fit 72 inch Yakima tracks. And you actually don't need to purchase anything separately as there is an all-in-one package depending on the crossbar length you want: - 78" Crossbars: Yakima OverHaul HD…

view full answer...

Answer 8

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

I checked directly with Thule for you, and can confirm the Force XT rooftop cargo box will indeed fit the factory crossbars on your 2021 Subaru Crosstrek. The correct part for the XT Large is the following: - Thule Force XT L Rooftop Cargo Box…

view full answer...

Answer 11

There are adapters for the Rhino-Rack Quick Mount Legs part #RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other…

view full answer...

Answer 12

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Can Rotopax Mounting Kit for Yakima OverHaul HD Fit Thule Bars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching