bing tracking image
Customer Service My Orders
Q & A Icon

Compatibility of Hub/Rotor, U-Bolts, Hangers, and Bearings for 6k Trailer Axle  

Question:

Hi, before I order I need to confirm if these parts work together: e23GR - 6,000lb 89inch axle RM-2460 - Roadmaster Shocks Kit 5.2k to 7k APS4 - Hanger Kit CE23003 - U-bolt Kit 5.2k to 7k TRSS300 - Spring Seat 5.2k to 7k SP-111275 - 5 leaf for 6,000lb K2HR712D - Kodiak Disk 13inch 8 x 6.5 7k lb DBRKHW7 - Bearing Kit 13inch Rotor 1/2inch bolts - 7k lb The disks are for 7k lb, but the spindle is still #42 so I figured it should work. I need the 89inch axle, but no 7k lb available, and I need the 8x6.5 bolt pattern but not available as disk in 6k lb. so hope this works.

0

Expert Reply:

The trailer axle components between a 5.2k and 7k trailer axle are essentially all the same so what you are wanting to do overall will work. The axle # e23GR is 3 inch in diameter so the shock kit part # RM-2460 will fit it. The hanger kit part # APS4 though is a single axle hanger kit and since the shock kit is for a tandem setup it's worth mentioning that and offering the tandem axle setup # H248.

The U-bolt kit part # CE23003 does fit the axle diameter, as well as the spring seat part # TRSS300. The hub/rotor part # K2HR712D also fits the spindle of the axle and the bearing kit part # DBRKHW7 would as well.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Products Referenced in This Question








Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for K2HR712DInstructions for RM-2460
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>