Curt C11525 Hitch for 2022 Honda Accord

Question

Question:

Will the Curt C11525 fit my 2022 Honda Accord. It is not a Hybrid.

asked by: Nikki

0

Expert Reply:

The Curt # C11525 is a confirmed fit for your 2022 Honda Accord as long as it is not a hybrid model. It has 2000 lbs towing/200 lb tongue weight capacities.

I have attached an installation video and installation instructions for you to check out.

expert reply by: Mike L

0

Installed Apperance of Draw-Tite 24972 and Curt C11525 on 10th Gen Honda Accord
(click to enlarge)

Answer 1

We do not have a hitch that will fit for your 2020 Honda Accord Hybrid. Instead, you can carry bikes on a trunk mounted rack or cargo on a roof rack. Both are available for your Honda Accord.

view full answer...

Answer 2

I do have an option for you but the T-One Vehicle Wiring Harness for Factory Tow Package part #118278 is not a confirmed fit for your 2014 Mazda CX-9. Instead, you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector…

view full answer...

Answer 3

Both the Curt #C11418 and Draw-Tite #24933 trailer hitch receivers install into the same location as each other on your 2016 Mazda CX-3. However, the Draw-Tite does not require the use of the support strap #18050 like the Curt does. Both racks are…

view full answer...

Answer 4

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 5

Draw-Tite has been around a lot longer than Curt, but both make a high quality product, you can't go wrong either way. If your CX-5 has a Diesel motor, you'll use the Draw-Tite Class III hitch, part #DR44FR which is the only fit offered. If…

view full answer...

Answer 6

Your 2021 Mazda CX-9 comes with a factory OEM tow package. Essentially all this is, is a plug in port that allows you to plug in the wiring harness instead of having to splice it into your wiring. Both the T-One Vehicle Wiring Harness for Factory Tow…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Curt C11525 Hitch for 2022 Honda Accord

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching