Is There A Curt Hitch Receiver That Will Fit My 2022 Hyundai Tucson

Question

Question:

C13240,,will this fit 2022 Hyundai Tucson

asked by: Allan C

1

Helpful Expert Reply:

The Curt hitch receiver that is compatible with your 2022 Hyundai Tucson is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C94WR. It has a tongue weight of 525 lbs and a maximum gross trailer weight of 3,500 lbs. The Curt hitch receiver that was attached to your question will not fit your vehicle.

I have included a product description link below.

expert reply by: Mark Smith

1

Answer 1

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 2

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

Answer 3

It looks like the instructions for the Curt #C94WR are back up and running. That being said, they do mention the panel that needs to be removed. We do mention that trimming may be needed to reattach this panel, but with this being as new as it is, we…

view full answer...

Answer 4

For your 2020 Hyundai Santa Fe that's equipped with the factory tow package, the trailer wiring harness is the Curt T-Connector #CU94FR. This custom harness is going to plug right into that factory tow port beneath the vehicle, on the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Is There A Curt Hitch Receiver That Will Fit My 2022 Hyundai Tucson

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching