Correct Camera Extension Cable for Voyager AOM713 Monitor

Question

Question:

I have the aom-713wp system. Everything works great except I need a 25+cable to the camera. What part # and how much would the camera cable be?

asked by: Ian D

0

Expert Reply:

The Voyager Camera Extension Cable is offered in a few different lengths, part # CEC25 for 25' or part # CEC34 for 34' are the two best options for you. They are compatible with the Voyager AOM713 Monitor.

expert reply by: Conner L

0

Answer 1

The RVS camera kit part #RVS-2311 has a matching connector that would fit to the #RVS-885.

view full answer...

Answer 2

The replacement camera for RVS systems #RVS-776 works with the 5 pin camera extension cable #RVS-885.

view full answer...

Answer 3

We have 5 pin RV camera extension cables like with the part #RVS-885 which is 50 feet in length.

view full answer...

Answer 4

I have a really great backup camera solution for your 2017 Ram 3500 with the GCH part #3460015 which replaces your third brake light and gives you a camera that views from up there. The RVS-777 would not have the correct connector to fit your…

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Correct Camera Extension Cable for Voyager AOM713 Monitor

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching