Replacement Awning Tube for 20 Foot Solara RV Awning

Question

Question:

My customers Solera awning has a bent tube. The awning measurement is 20’ from center to center of the awning arms. I need the correct tube in black. The description is confusing. Thanks

asked by: Patrick N

0

Expert Reply:

I've checked with Lippert, who tells me that you'd need to measure the length of the actual tube itself, rather than the center arm to center arm length. Given the length you measured, the # LC33FR you'd looked at would be the likely replacement.

expert reply by: Mike L

0

Customer Submitted Photo
(click to enlarge)

Answer 1

The inner diameter of Solera roller tubes like the Replacement 20' Roller Tube for Solera RV Awnings #LC33FR is 3", that being said Solera and other branded awnings are not compatible with each other. We typically have a lot of people…

view full answer...

Answer 2

We do offer a hinge that may work well for you. I recommend part #PLR1904-Z. This is a barn door hinge for dump trucks and is made of 1/4 inch steel. This has a smooth surface that is designed for welding. I have also attached a photo of this hinge…

view full answer...

Answer 3

I took a look at what we have, and the closest I was able to find was the: - Solera Destination Manual RV Awning #LCV000335270-334719 for black. Or -Solera Destination Manual RV Awning #LCV000335296-334718 for white. These awnings measure…

view full answer...

Answer 4

The Solera Classic Universal Awning Support Arms #LC434720 is designed to replace the arms and springs on your manual Dometic awning. You must have between 81"-96" in height between the top awning rail and where the bottom bracket mounts on…

view full answer...

Answer 5

The distance between the left and right support arm brackets for the Solera Smart Arm 12V Power RV Awning part #LC405523 is exactly 20' on center. I have attached a photo for you that shows how the awning width is measured. The actual fabric is…

view full answer...

Answer 6

To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724 if you have a manual crank system. These Solera kits are compatible with Dometic (A&E) awnings like what you…

view full answer...

Answer 7

Since you said you can use a Solera awning tube and yours is 19 foot 6 inches long the correct replacement roller would be the part #LC33FR.

view full answer...

Answer 8

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

view full answer...

Answer 9

To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724. These kits were specifically designed for converting manual Dometic awning like yours to power awnings so the…

view full answer...

Answer 10

For your Dometic awning you can convert it to a powered awning with the part #LC759404 which works with Dometic setups like you have. The #LC329250 that you referenced only works with Solera manual awnings.

view full answer...

Answer 11

I couldn't find much on the P10034AP-L3-FR01 model number you provided. The closest to that number I found was the P10034AP-L3-FR02 which has measurements of 17" tall x 25" wide x 17.3" deep. The closest option we have to those…

view full answer...

Replacement Awning Tube for 20 Foot Solara RV Awning

Product Page this Question was Asked From

Continue Researching