Trailer Hitch that Fits 2021 Ram 1500 Classic Tradesman

Question

Question:

looking for a 2021 Ram 1500 classic tradesman Quad cab 4x2 hitch but your site dont have the tradesman option. so what would the truck be listed as?

asked by: Pat

0

Expert Reply:

Sounds like you are looking for a trailer hitch that fits your 2021 Ram 1500 Classic Tradesman which we have options for that like with the etrailer hitch part # e98852 which would work great. There is no fit exclusion for this hitch for the Tradesman models.

expert reply by: Jameson C

0

Answer 1

In order to tow a trailer with a 2019 Ram 1500 Classic you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. For a trailer hitch, I recommend the etrailer Trailer Hitch Receiver part #e98852 which offers an easy bolt-on…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver #e98852 is a fit for your 2019 Ram 1500 Classic, so you do have the right hitch for your truck. It is rare that the bumper cap can't go back on easily, but the space between the cap and your bumper is…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

view full answer...

Answer 4

To order replacement hardware for the etrailer Trailer Hitch Receiver #e98852 you just need the part #RHK. Just fill out the box and select etrailer in the drop down menu and we will send you all of the hardware that comes with the kit, including the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Trailer Hitch that Fits 2021 Ram 1500 Classic Tradesman

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching