Replacement Hardware for etrailer Trailer Hitch Receiver e98852

Question

Question:

Can I order a hardware kit? Meaning the nuts/bolts and did wire?

asked by: TnD

0

Expert Reply:

To order replacement hardware for the etrailer Trailer Hitch Receiver # e98852 you just need the part # RHK. Just fill out the box and select etrailer in the drop down menu and we will send you all of the hardware that comes with the kit, including the fishwire.

expert reply by: Jon G

0

Answer 1

Sounds like you are looking for a trailer hitch that fits your 2021 Ram 1500 Classic Tradesman which we have options for that like with the etrailer hitch part #e98852 which would work great. There is no fit exclusion for this hitch for the Tradesman…

view full answer...

Answer 2

In order to tow a trailer with a 2019 Ram 1500 Classic you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. For a trailer hitch, I recommend the etrailer Trailer Hitch Receiver part #e98852 which offers an easy bolt-on…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e98852 is a fit for your 2019 Ram 1500 Classic, so you do have the right hitch for your truck. It is rare that the bumper cap can't go back on easily, but the space between the cap and your bumper is…

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver #e98852 measures 7-3/4" from center of hole to center of hole on the back plate. The holes are 1-1/2" to the center of the hole from the top of the receiver on the back plate(see image).

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Replacement Hardware for etrailer Trailer Hitch Receiver e98852

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching