Spindle Replacement on 2006 Fleetwood Prowler Camper
Question:
How do you remove and replace the spindle on a 2006 Fleetwood Prowler 25 camper?
asked by: Al L
Expert Reply:
Replacing the spindle on your axle will require cutting the old spindle off and welding a new spindle (see link) in its place. You would need to find a certified welder so that he has the proper tools and welding equipment to make the repair. To figure out which spindle is correct for your trailer you can use the bearing part numbers, both inner and outer, axle weight capacity and the shape and length of the spindle stub on your trailer. The bearing numbers will let you cross reference the correct spindle measurements for your hub. The axle stub shape and length will allow you to use the same mounting position as the original spindle.
Many times a new axle is the way to go if you have reason to replace one of the spindles. You may find that since you have the axle out of the trailer, or have to have someone remove it and repair it, that the cost will be about the same or just slightly more to replace the axle with a new one. You should also keep in mind that the spindle you referenced, # TRU37FR, is rated for 2,600 lbs, so if your trailer axle is rated for over 5,200 lbs you will be derating the axle and limited to 5,200 lbs per axle.
At this time we do not carry trailer axles so a local RV dealer or trailer manufacturer may be your best option.
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Search Results: brake mounting flange
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 5,200 lbs to 6,000 lbs
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Video: Dexter Axle Trailer Brakes BRKH122508 Review
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Peterson Clearance and Side Marker Trailer Light - 2 Bulbs - Oblong - Amber Lens
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Suspension Enhancement
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Search Results: 023~105~00
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Article: Double-Eye Trailer Suspension System Review
- Video: Review of etrailer by AxleTek Trailer Axles - 89 Inch 5,200 lbs Axle With Electric Brakes - e75sr
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327820
- Search Results: trailer brake mounting flange
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU57FR
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height
- Search Results: hub
- Q&A: Locating Replacement Trailer Hubs and Drums for Mobile Home Axle
- Q&A: Do Mobile Home Axles Have Weight Capacity Rating
- Q&A: Determining Weight Capacity of Dexter Mobile Home Axle Using Serial Number
- Q&A: Replacement Spindle Option for Mobile Home Axle
- Search Results: 12 x 2 electric brake assembly
- Search Results: rock lights
- Search Results: trailer brake wiring
on Trailer Spindles
