Trailer Hitch and Wiring Harness Fit for 2022 Nissan Pathfinder

Question

Question:

Hi, I just purchased a 2022 Nissan Pathfinder SL 4x4. According to your info DT67GR hitch and C59236 wiring harness kit should be compatible.

asked by: Jeffrey G

1

Helpful Expert Reply:

Draw-Tite confirmed for me the # DT67GR trailer hitch is a confirmed fit for the 2022 Nissan Pathfinder.

And although there isn't a plug and play trailer wiring option available, the # C59236 is a universal application that will work on your '22 Pathfinder

expert reply by: Mike L

1

Answer 1

We have exactly what you need as the correct trailer hitch for the 2023 Nissan Pathfinder is the Curt Trailer Hitch Receiver #C46DR.

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT67GR is currently the only receiver I see that is a confirmed to fit your 2022 Nissan Pathfinder. This will require you to trim a section of your rear fascia for the receiver. I do not see that…

view full answer...

Answer 3

For your 2022 Nissan Pathfinder SL I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT67GR. This is a custom-fit Class IV hitch with a 2" receiver. It has a max gross trailer weight of 6,000 lbs, tongue weight of 900 lbs which…

view full answer...

Answer 4

Yes, we do have the Curt Trailer Hitch Receiver #C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported. The T-One Vehicle Wiring Harness…

view full answer...

Answer 5

For your 2022 Nissan Pathfinder I recommend the Curt Trailer Hitch Receiver #C46DR. This Class 3 hitch has a 2" receiver and maximum tongue weight of 900 lbs which will be more than enough for your Hollywood Racks Sport Rider SE2 Bike Rack…

view full answer...

Answer 6

Yes, we do have a trailer hitch for your 2022 Nissan Pathfinder. We have the Curt Trailer Hitch Receiver #C46DR. This hitch has a gross towing capacity of 6,000-lbs, and a maximum tongue weight of 900-lbs. You should consult your vehicles owner…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch and Wiring Harness Fit for 2022 Nissan Pathfinder

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching